This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
where is best place for CC parts
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1750
- Joined: Sun Feb 02, 2003 1:09 pm
- Zip Code: 64784
- Circle of Safety: Y
- Location: Mo, Sheldon
where is best place for CC parts
Just wondering where is the best place to buy new parts for Cadets, like muffler, seat, gas tank cap, etc.? I mostly buy new parts from the board sponsors but I guess they don't handle Cadet parts.
Jim Turner
-
- 10+ Years
- Posts: 2338
- Joined: Sat Apr 10, 2004 6:12 pm
- Zip Code: 40218
- Circle of Safety: Y
- Location: KY, Louisville
Re: where is best place for CC parts
Jim
Any Cub Cadet dealer, or some parts can be had thru a Case IH dealer, or Ken Updike at C&G.
Any Cub Cadet dealer, or some parts can be had thru a Case IH dealer, or Ken Updike at C&G.
-
- Team Cub Mentor
- Posts: 20378
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: where is best place for CC parts
First, I get most CC parts from the auto parts store. 2nd place is the Case/IH dealer. 3rd place is the New Holland dealership but you must have the IH part number.
-
- 10+ Years
- Posts: 13
- Joined: Sun May 23, 2010 9:58 pm
- Zip Code: 38401
Re: where is best place for CC parts
I've always had good luck with Madson's Service in Wisconsin. They carry new and used stuff and usually have some of the harder to find stuff. I usually talk to Scott, he's a bit more knowledgeable than some of the others. Good folks!
CC 70, CC 100, CC 106, CC 128, CC 149, CC 169, CC 1000, CC 1450, CC 782 (2 of 'em, one early, one late), CC 982, CC 1782, Cadet 76, IH 184, IH 684, IH 3311, IH 3314, Case 222, Case 446, various Lawnboys and one old Snapper. Not all of 'em run...
-
- 10+ Years
- Posts: 281
- Joined: Wed Aug 31, 2005 10:17 am
- Location: Wamego Kansas
Re: where is best place for CC parts
You guys must have better IH dealers than I do. The local guys here don't know there was an International Harvestor Company, they think it all started with a company called Case/IH. I wouldn't even know where to begin looking for a Cub Cadet dealer besides Home Depot - and they aren't any better than the IH dealer for supplying parts.
Freedom is for those that claim it.
-
- 10+ Years
- Posts: 2338
- Joined: Sat Apr 10, 2004 6:12 pm
- Zip Code: 40218
- Circle of Safety: Y
- Location: KY, Louisville
Re: where is best place for CC parts
Cub Cadet dealers in your area:
Rossville Truck & Tractor
12635 NW Hwy 24
Rossville, KS
(785) 584-6195
and
Tarwarter Farm & Home
4107 North Topeka Blvd
Topeka, KS
Home Depot and Tractor Supply are not Cub Cadet cealers. They both sell low end Cub Cadets, but they do not provide service or parts (others than belts, spark plugs, filters etc)
Rossville Truck & Tractor
12635 NW Hwy 24
Rossville, KS
(785) 584-6195
and
Tarwarter Farm & Home
4107 North Topeka Blvd
Topeka, KS
Home Depot and Tractor Supply are not Cub Cadet cealers. They both sell low end Cub Cadets, but they do not provide service or parts (others than belts, spark plugs, filters etc)
-
- 10+ Years
- Posts: 281
- Joined: Wed Aug 31, 2005 10:17 am
- Location: Wamego Kansas
Re: where is best place for CC parts
Rossville can get "maintenance" items Hydrostat filters, rear gasket, airfilters etc... They don't have the ability (willingness?) to find something difficult - like a spindle for my 50A deck or a rebuild kit for the front PTO on my 125. After a few trips where they looked up something in their books for a while and eventually said "We can't find it so it must not be available anymore" I quit relying on them. They are pretty good about looking up parts for older tractors and equipment though.
Years ago I used Henry Brothers out of Seneca, I would order the part over the phone and have it delivered to my house. Now that Bruna Bros have bought them out the old stuff is nolonger of interest to them either (a 1450? - are you sure its not a 1405?). The same thing that happened when KanEquip took over the CaseIH Dealership in Wamego. Its embarrassing try to buy parts for some of my older stuff there. (I don't have a 440 baler book - what brand is that again?).
Parts Tree has been pretty handy to use.
http://www.partstree.com/parts/?lc=Cub+Cadet&mn=
I have never set foot in Tarwaters.
Years ago I used Henry Brothers out of Seneca, I would order the part over the phone and have it delivered to my house. Now that Bruna Bros have bought them out the old stuff is nolonger of interest to them either (a 1450? - are you sure its not a 1405?). The same thing that happened when KanEquip took over the CaseIH Dealership in Wamego. Its embarrassing try to buy parts for some of my older stuff there. (I don't have a 440 baler book - what brand is that again?).
Parts Tree has been pretty handy to use.
http://www.partstree.com/parts/?lc=Cub+Cadet&mn=
I have never set foot in Tarwaters.
Freedom is for those that claim it.
-
- 10+ Years
- Posts: 17
- Joined: Sun Mar 14, 2010 11:37 am
- Zip Code: 06468
- Tractors Owned: 1940 Farmall H
1945 Farmall A
1949 Super A
Farmall BN
1951 Farmall Cub
1961 Cub Lowboy
Gravely 810
1967 Cub Cadet 102
1967 Cub Cadet 122
1968 Cub Cadet 72
1968 Cub Cadet 72
1968 Cub Cadet 104
1968 Cub Cadet 125
1969 Cub Cadet 124
1971 Cub Cadet 147
1971 Cub Cadet 149
1974 Cub Cadet 108
Re: where is best place for CC parts
www.cngco.com a lot of new parts.
-
- 10+ Years
- Posts: 1041
- Joined: Mon Jun 28, 2004 1:45 pm
- Zip Code: 00000
- Tractors Owned: 1950 Cub
2000 Simplicity Landlord DLX
1988 JD 322 Garden Tractor with hydraulic scoop, 54" scrape blade and 48" mower deck, Haban 3 pt hitch sickle bar mower
2014 LS XR3032H w/ FEL and BH - Circle of Safety: Y
Re: where is best place for CC parts
Another vote for Carter & Gruenwald (sp?) http://www.cngco.com. They have a parts look up similar to partstree so you can find the right part, cross reference to other models of CC's, and the current price.
Though trillions and trillions of eyes have been watching the skies for as long as human memory exists, no gods nor angels have been seen or documented outside of religion. The number of spaceships being sighted however has become much more prevalent.
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: where is best place for CC parts
I go to www.partstree.com to look up the part numbers and then go to "stens" and punch in the part number for an awesome "lower price" on new parts.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- 10+ Years
- Posts: 113
- Joined: Fri Jun 24, 2005 8:16 am
Re: where is best place for CC parts
1957 IH Cub Lo-Boy | 1972 Cub Cadet 128 | 1974 Cub Cadet 109 | 1967 857 Wheel Horse
-
- 10+ Years
- Posts: 39
- Joined: Tue Feb 26, 2008 11:05 pm
- Location: Mecklenburg County, N.C.
Re: where is best place for CC parts
I don't know where you're at, but I have had a lot of luck with Charlotte Tractor in North Carolina. I don't know if they ship, but I have been able to order parts that Cub Cadet dealers have told me I can no longer get.
Here is their web-site and phonw number-
704-596-8900
www.charlottetractor.com
good luck
Here is their web-site and phonw number-
704-596-8900
www.charlottetractor.com
good luck
-
- 10+ Years
- Posts: 682
- Joined: Fri Feb 07, 2003 8:43 am
- Zip Code: 53536
- Tractors Owned: Tractors owned past/present:
Farmall.....F-1206, F-806 sn#501.
Cub Cadet...Original(s), 122, Spirit of 76, 1200, 1250, 1450, 782, 782 Diesel (2), 984, 982, CADET 000 LT Prototype. - Circle of Safety: Y
- Location: Wisconsin.......The Badger State
Re: where is best place for CC parts
Something you may notice with the STENS or ROTARY parts is that they are mostly made in CHINA and tend to be lower quality in construction. I've had a few parts from these places that look right but won't fit right.
C&G has been a Cub Cadet dealer since the Cub Cadet was born. I know that we have the people and technical resources here to get some of those parts that other dealers just can't seem to give you. We are not the lowest priced parts dealer, but our service is better than the other "parts sellers". We offer a total support package with a full service shop and knowledgable personell.
Partstree is a Cub Cadet parts dealer that has spent alot of $$$$$ on internet advertising to build thier parts business.
C&G has been a Cub Cadet dealer since the Cub Cadet was born. I know that we have the people and technical resources here to get some of those parts that other dealers just can't seem to give you. We are not the lowest priced parts dealer, but our service is better than the other "parts sellers". We offer a total support package with a full service shop and knowledgable personell.
Partstree is a Cub Cadet parts dealer that has spent alot of $$$$$ on internet advertising to build thier parts business.
Cub Cadets....Engineered for people who know better!
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2
- 1244
-
by BigBill
Thu Jun 10, 2021 1:52 pm
Who is online
Users browsing this forum: No registered users and 2 guests