This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
I messed up - now it wont start
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1
- Joined: Tue Jun 22, 2010 7:13 pm
- Zip Code: 06783
I messed up - now it wont start
1973 lo boy 154. The generator was rebuilt and the voltage regualtor is 2 years old. The tractor ran great. The throttle cable was stuck so I replaced it. When putting the dash back together, it sparked. I know...I forgot to disconnect the battery. Now it wont turn over at all. The battery is fully charged. Did I blow out the voltage regulator?? What else could it be? I replaced the fuse. Dont yell at me.
- SONNY
- 10+ Years
- Posts: 4107
- Joined: Thu Nov 09, 2006 11:26 pm
- Zip Code: 61722
Re: I messed up - now it wont start
Re-check your wiring connections where you did the replacement and see if they are still making good contact!----sounds like just a connection problem to me! thanks; sonny
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Re: I messed up - now it wont start
Check all the safety interlocks.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: I messed up - now it wont start
The only safety interloc is the clutch pedal so it has to be depressed when starting.
Whats the fuse control?
Whats the fuse control?
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- Team Cub Mentor
- Posts: 20370
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: I messed up - now it wont start
http://www.ihregistry.com/wire/K16.pdf
Wiring diagram for the 154.
This diagram shows the PTO and clutch safety switch wired in series.
Wiring diagram for the 154.
This diagram shows the PTO and clutch safety switch wired in series.
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 10 guests