This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Cub 6 tool bar info

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
tinnerjohn
10+ Years
10+ Years
Posts: 754
Joined: Sun Jan 20, 2008 5:52 pm
Zip Code: 44491
Tractors Owned: 52 Cub, 42 Farmall H 49 Ford 8N (FIL's tractor) and a yard full of implements for them 51 Chevy 3100 PU
Circle of Safety: Y
Location: West Farmington, OH

Cub 6 tool bar info

Postby tinnerjohn » Fri Jun 25, 2010 11:29 am

Bought Dale's toolbar, but will need to make guide rails (part #4&5 on pg. 13 of manual in manual forum) Sorry I'm not smart enough to copy to this post. Does anyone have access to these parts to give me the measurements so I can make a set. Thanks. John

SPONSOR AD

Sponsor



Sponsor
 

User avatar
Winfield Dave
10+ Years
10+ Years
Posts: 3557
Joined: Thu Apr 22, 2010 2:31 pm
Zip Code: 17953
Tractors Owned: ......Almost enough.
N3NIK
Circle of Safety: Y
Location: PA, Middleport (Schuylkill County)

Re: Cub 6 tool bar info

Postby Winfield Dave » Fri Jun 25, 2010 11:43 am

tinnerjohn wrote:Bought Dale's toolbar, but will need to make guide rails (part #4&5 on pg. 13 of manual in manual forum) Sorry I'm not smart enough to copy to this post. Does anyone have access to these parts to give me the measurements so I can make a set. Thanks. John

Here ya go:
Image
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill

User avatar
Gator809
10+ Years
10+ Years
Posts: 389
Joined: Thu Jul 02, 2009 1:06 pm
Zip Code: 70816
Circle of Safety: Y
Location: Baton Rouge Louisiana

Re: Cub 6 tool bar info

Postby Gator809 » Fri Jun 25, 2010 11:48 am

I'll measure my set at home when I get there after work. Mine aren't original....But they were coppied from an original set. I'll shot a pic or 2 also.

Hank
"Tiger" 1974 International Cub
"Littl' Smokey" 104 Cub Cadet
"Red Light" 1952 Farmall Cub with 151 disc plow
"Lucky" 1970 International 140

Bill E Bob
10+ Years
10+ Years
Posts: 3034
Joined: Wed May 31, 2006 12:09 pm
Zip Code: 74070
Circle of Safety: Y
Location: OK, Skiatook

Re: Cub 6 tool bar info

Postby Bill E Bob » Sat Jun 26, 2010 6:56 pm

Gator809 wrote:I'll measure my set at home when I get there after work. Mine aren't original....But they were coppied from an original set. I'll shot a pic or 2 also.

Hank


Thanks Hank, I had some dimensions from Dale, but evidently I deleted 'em :oops: :oops: :roll:
Bill

tinnerjohn
10+ Years
10+ Years
Posts: 754
Joined: Sun Jan 20, 2008 5:52 pm
Zip Code: 44491
Tractors Owned: 52 Cub, 42 Farmall H 49 Ford 8N (FIL's tractor) and a yard full of implements for them 51 Chevy 3100 PU
Circle of Safety: Y
Location: West Farmington, OH

Re: Cub 6 tool bar info

Postby tinnerjohn » Sun Jun 27, 2010 6:50 pm

Thanks fellows. I don't have them here yet, but I want to be ready to mount them. You know how a kid with a new toy is. :D John

59cub
10+ Years
10+ Years
Posts: 260
Joined: Sun Nov 04, 2007 9:07 pm
Zip Code: 44234
Tractors Owned: (2) 1959 Cubs (1) 1951 Cub
Circle of Safety: Y
Location: Ohio, Hiram

Re: Cub 6 tool bar info

Postby 59cub » Sun Jun 27, 2010 6:55 pm

Tinnerjohn, did you make it to the "world's largest tractor parade" this weekend? Check out the for sale section, I have some cultivator pieces parts for sale, maybe what you need?

tinnerjohn
10+ Years
10+ Years
Posts: 754
Joined: Sun Jan 20, 2008 5:52 pm
Zip Code: 44491
Tractors Owned: 52 Cub, 42 Farmall H 49 Ford 8N (FIL's tractor) and a yard full of implements for them 51 Chevy 3100 PU
Circle of Safety: Y
Location: West Farmington, OH

Re: Cub 6 tool bar info

Postby tinnerjohn » Wed Jul 14, 2010 8:11 pm

Moved this back to top. Still need the dimensions if someone can help. I can probably come close by trial and error, but we all know how that can work sometimes. Thanks again. John

User avatar
BIGHOSS
Cub Pro
Cub Pro
Posts: 1741
Joined: Tue Jul 18, 2006 9:55 pm
Zip Code: 37087
Tractors Owned: 1947 Cub S/N 9216
w/ C-22 Mower

1974 Cub S/N 244814
w/59 Woods Mower

Ford 3000 Gas S/N C375091 w/Bushhog QT2345 Loader & 6' Squealer Bushhog
and a Palomino Mare named GIGI
Circle of Safety: Y
Location: TN, Lebanon

Re: Cub 6 tool bar info

Postby BIGHOSS » Wed Jul 14, 2010 9:38 pm

Tinnerjohn, I think that your toobar is on my trailer as we speak. It is heavy enough to provide ballast behind cub. We plan to be at Bigdog's tomorrow afternoon.
"Courage is being scared to death-but saddling up anyway".......John Wayne

User avatar
Bill Hudson
Team Cub
Team Cub
Posts: 9516
Joined: Wed Jul 26, 2006 10:50 am
Zip Code: 44057
Tractors Owned: 57 F-Cub - Dad & Mom's Cub
77 F-Cub - Red Long Stripe
Circle of Safety: Y
Location: OH, Madison

Re: Cub 6 tool bar info

Postby Bill Hudson » Thu Jul 15, 2010 6:47 am

BIGHOSS wrote:Tinnerjohn, I think that your toobar is on my trailer as we speak. It is heavy enough to provide ballast behind cub. We plan to be at Bigdog's tomorrow afternoon.


Great. I'll see you this afternoon (I'll be near the pig roasting spit) so we can make the switch.

Bill
Bill

"The probability of life originating from accident is comparable to the probability of the unabridged dictionary resulting from an explosion in a printing shop." Edwin Conklin, biologist

Image
Member of Ohio Chapter #6

tinnerjohn
10+ Years
10+ Years
Posts: 754
Joined: Sun Jan 20, 2008 5:52 pm
Zip Code: 44491
Tractors Owned: 52 Cub, 42 Farmall H 49 Ford 8N (FIL's tractor) and a yard full of implements for them 51 Chevy 3100 PU
Circle of Safety: Y
Location: West Farmington, OH

Re: Cub 6 tool bar info

Postby tinnerjohn » Thu Jul 15, 2010 6:58 am

Thankyou Big Hoss and Bill. Have a safe trip there and back and a great time at the Tug. Wish I could make it. Maybe next year. John

User avatar
OliverFarmall
10+ Years
10+ Years
Posts: 480
Joined: Wed Jul 28, 2010 12:53 pm
Zip Code: 18822
eBay ID: ranger_jer
Circle of Safety: Y
Location: PA, Hallstead (Susquehanna County)

Re: Cub 6 tool bar info

Postby OliverFarmall » Wed Oct 13, 2010 7:34 am

Does anyone have dimentions for this thing ?
Is the bar 1.5 x 1.5 ? How long is it?
How long are the attaching arms, how far along til they bend and wahts the angle ?
I can't find one of these and need to make one but cant find one to look at in person and measure myself, any and all help is appreciated !
22 sickle bar mower x2
23A tandem disc harrow
144 cultivator (#53 & #97 spring tooth)
154 leveling and grader blade
189 moldboard plow 2-way
193 moldboard plow x2



spring tooth harrows
David Bradley planter (modded for Cub)

tinnerjohn
10+ Years
10+ Years
Posts: 754
Joined: Sun Jan 20, 2008 5:52 pm
Zip Code: 44491
Tractors Owned: 52 Cub, 42 Farmall H 49 Ford 8N (FIL's tractor) and a yard full of implements for them 51 Chevy 3100 PU
Circle of Safety: Y
Location: West Farmington, OH

Re: Cub 6 tool bar info

Postby tinnerjohn » Wed Oct 13, 2010 9:15 am

Heres some measurements. The bar is 1.75 sq. X 56". The arms are 1" X 2 3/8 " X 38 1/2" with a 25 degree bend 20" from the tractor end (where they pin to part 6). Hope this helps. If you want, PM your address and I'll mail some pics and measurements. Sorry, but I haven't been able to master that stuff on the computer. John

DavidG
10+ Years
10+ Years
Posts: 70
Joined: Sat Mar 06, 2010 6:55 am
Zip Code: 20132
Tractors Owned: 1972 IH Cub
1976 IH Cub
1979 IH 884
Circle of Safety: Y
Location: Northern Virginia
Contact:

Re: Cub 6 tool bar info

Postby DavidG » Sun Nov 11, 2012 6:10 am

Thanks for posting those dimensions a while ago, it's really useful.
I'm curious about the bracket too (part 6) -- can someone tell me how long it is end-to-end, and how thick/wide the piece of steel it's made from is?
-David
Vegetable farming with a Cub, http://www.secondspringcsa.com

tinnerjohn
10+ Years
10+ Years
Posts: 754
Joined: Sun Jan 20, 2008 5:52 pm
Zip Code: 44491
Tractors Owned: 52 Cub, 42 Farmall H 49 Ford 8N (FIL's tractor) and a yard full of implements for them 51 Chevy 3100 PU
Circle of Safety: Y
Location: West Farmington, OH

Re: Cub 6 tool bar info

Postby tinnerjohn » Sun Nov 11, 2012 9:01 am

David, I just checked one of mine. I bracket is 1/2"X3" Flat stock, 12 1/2" to inside of bend on long side, 4 1/2" on short side. Don't forget the offset since the toolbar arms are narrower than the finals, unless your custom building that. If it would help, I could send you a tracing of mine if you PM your address. Hope this helps and pause at 11:11 AM to remember our veterans. John


Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 31 guests




      
cron