Step up

Farmall Super A, AV, 100, 130, & 140 1939 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Dognose
5+ Years
5+ Years
Posts: 23
Joined: Tue Jun 22, 2010 5:16 pm
Zip Code: 46140

Step up

Postby Dognose » Wed Aug 18, 2010 10:37 pm

Any good designs for a step for a Farmall A?

Bob McCarty
Team Cub
Team Cub
Posts: 8228
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: Step up

Postby Bob McCarty » Wed Aug 18, 2010 10:44 pm

I don't have an A, but here's one on eBay that might give you design ideas: http://cgi.ebay.com/Farmall-Cub-AV-SA-S ... ltDomain_0

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein

User avatar
Bigdog
Cub Pro
Cub Pro
Posts: 24142
Joined: Sun Feb 02, 2003 12:50 pm
Zip Code: 43113
Circle of Safety: Y
Location: OH, Circleville

Re: Step up

Postby Bigdog » Thu Aug 19, 2010 6:56 am

TM Tractor has a step listed for the A.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

Image

http://www.cubtug.com

Dognose
5+ Years
5+ Years
Posts: 23
Joined: Tue Jun 22, 2010 5:16 pm
Zip Code: 46140

Re: Step up

Postby Dognose » Thu Aug 19, 2010 6:05 pm

That would work except I have a bar using one of those holes. See attached.
Attachments
step_bolting_loc.jpg

User avatar
artc
Cub Pro
Cub Pro
Posts: 1860
Joined: Sun Mar 30, 2003 10:25 am
Zip Code: 06457
eBay ID: cmtelephone
Tractors Owned: Restored: 1950 Cub, 1950 Cub Demo, 1948 super AI, 1935 Silver King, 1946 Oliver 60 RC, John Deere M

In working clothes:
1950 cub, 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial. IH 450,
Location: CT, Middletown

Re: Step up

Postby artc » Fri Aug 20, 2010 9:57 am

i would modify a step that used the front two mounting holes to step out around what you have mounted in the lower hole. then just use a longer bolt in that location.

i'll get a picture of one of mine tonight.
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org


Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: No registered users and 1 guest