How To Re-Use That Old Serial Number Plate
Starting with a clean bench:
Grind old rivets flat with facing:
Center tap flatten rivets:
Size your rivets and drill bit, also black tape the depth (length of rivet):
Drill your hole:
Clean off both plates with wire wheels:
Flatten plates accordingly:
Use door trim glue, spread evenly:
I had difficulty with the door trim glue so I used this, and it worked much better:
Clamp them together (orignal plate, and new plate purchased off ebay or elsewhere) Let set 24 hrs or more:
Tape off plate excluding the numbers. To prevent unneeded cleaning:
Spray paint with black paint:
Varnish the final product after removing the paint with a light sand paper or emory cloth to remove excess paint. The numbers should be highlighted by the black paint:
The final product should look like this prior to mounting:
Use a flat head punch to tap in rivets:
What do you think, pretty simple steps to follow?
Tips and tricks on repairs to your Cub’s structure.
Moderators: Barnyard, Team Cub
1 post • Page 1 of 1
- 10+ Years
- Posts: 6544
- Joined: Mon Jul 25, 2005 10:16 pm
- Zip Code: 61944
- Tractors Owned: -
55 F-Cub - snow plow and chains
3 Demonstrators Restored.
"Bette" - 22 mower
"Roxie" - 144 Complete Cults'
"Sandy"(Done) 193 Plow
1950 Demo, "Billie"
Corn Stalk Cutter
2005 Mahindra w/FEL
- Circle of Safety: Y
- Location: IL, Paris just off of Interstate 70
- Similar Topics
- Last post
by Bob McCarty
Mon Jan 23, 2017 11:16 pm
Serial number plate painted over, any paint removal advise?
by ChrisTheCaver » Thu Sep 29, 2016 9:14 am » in Farmall A, Super A, AV, 100, 130 & 140
by Super A
Wed Oct 05, 2016 4:55 pm
by Bill V in Md
Thu Sep 24, 2015 2:50 pm
Sun Sep 13, 2015 11:54 am
Mon Apr 17, 2017 7:44 am
Who is online
Users browsing this forum: No registered users and 0 guests