Post your introduction and "get to know me" information in this forum.
Moderator: Team Cub
13 posts • Page 1 of 1
CUBS ARE GREAT i got a 53 a couple years ago then i got a 49 i was going to part out but i just can't bring myself to take the old girl apart so i went and got a 51 in Tenn that was pulled down and the engine had a total rebuild and that project is still waiting for me , being i work offshore in the oilfield for 28 days and only get 14 days at home it is hard to get those projects done,i just got a snow-grader blade and i have no idea how to mount it or if i got all the parts so if any one has pictures of one mounted i sure could use them
Welcome to the forum. Post an ad in the "Wanted Cub Items" section, listing the type blade you have and what parts you need. Someone here may have them.
MD, Deep Creek Lake
"1950 Something" Farmall Cub, Cub-193 Moldboard Plow
1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower
1948 Farmall Super A, IH 22 Mower
1951 Farmall Super C w/FH
Duane, welcome to the forum. Check with www.ralphscubs.com for your plow parts. He has some used parts that may be what you need. He is a well respected sponsor of this forum and is very reasonable with his prices.
I don't believe in taking the bull by the horns. I took a goat by the horns once and that was enough excitement for me.
Barnyard Bash CubFest May 31 - June 1, 2013
Click here for info.
Glad you're here!
"It is impossible for a man to learn what he thinks he already knows." -Epictetus
252646 & 221525. 195897 (Gone but not forgotten!)
Welcome to the forum. We sure are getting a lot of new members from south Louisiana.
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
Welcome and congrats on already being a member of the MCC the Multiple Cub Club
You will find the manuals for the Cub-54 Leveling and Grader Blade including the parts breakdown on the server. That should help you identify all the parts and make sure you have them all. If you do not have them all then getting the needed parts via the Wanted Cub Items forum or from Ralph or JP Tractor would be the way to go. Assembly then will be a piece of cake..
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
"Before beginning a hunt, it is wise to ask someone what you are looking for before you begin looking for it." - Winnie
Cub Manual Server
13 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests