Farmall A fan assembly

Farmall Super A, AV, 1939 - 1954

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Farmall A fan assembly

Postby Dahlin » Sat Sep 18, 2010 2:54 pm

I need information on how to take the spindle out of the fan hub on my Farmall A. I have it off the braket that secures it to the tractor but am unsure how to get the rest apart.All and any suggestions are needed. :?: Thanks, Randy
Dahlin
Cub Star
Cub Star
 
Posts: 69
Joined: Sun Oct 25, 2009 6:53 pm
Zip Code: 54459

Re: Farmall A fan assembly

Postby Phillip W. Lenke » Mon Sep 20, 2010 9:14 am

you have to take the blade off, under there is a nut that has to be removed. keep a mental note of the oil slinger direction, that is the only difficulty in there.
Phil
"Work Hard ,Play Often,Care Always"
Phillip W. Lenke
5+ Years
5+ Years
 
Posts: 1479
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449

Re: Farmall A fan assembly

Postby Dahlin » Mon Sep 20, 2010 7:24 pm

Thanks Phillip, I had planed on replacing the assembly but after I took it apart I found I did not need to. It was full of grease and there was a little end movement, but otherwise seemed tight. Thanks again, Randy
Dahlin
Cub Star
Cub Star
 
Posts: 69
Joined: Sun Oct 25, 2009 6:53 pm
Zip Code: 54459

Re: Farmall A fan assembly

Postby Jim Becker » Mon Sep 20, 2010 10:28 pm

Clean the grease out and oil it per the Owner's Manual. I don't think that grease in there will ever get to where it needs to be.
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11978
Joined: Sun Feb 02, 2003 3:14 pm
Location: MN
Zip Code: 55319
Circle of Safety Award
Circle of Safety: Y

Re: Farmall A fan assembly

Postby Dahlin » Tue Sep 21, 2010 7:57 pm

Hi Jim, Thanks for responding. There is a grease fitting opposite of the oil fill plug. When that compartment gets full of grease it forces itself down the length of the shaft and comes out the other end. I think it may work this way. Thanks for your suggestion. Randy
Dahlin
Cub Star
Cub Star
 
Posts: 69
Joined: Sun Oct 25, 2009 6:53 pm
Zip Code: 54459

Re: Farmall A fan assembly

Postby Jim Becker » Tue Sep 21, 2010 8:45 pm

Fitting probably installed by a previous owner.
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11978
Joined: Sun Feb 02, 2003 3:14 pm
Location: MN
Zip Code: 55319
Circle of Safety Award
Circle of Safety: Y


Return to Farmall A, Super A, AV

Who is online

Users browsing this forum: No registered users and 2 guests