M
Moderator: Team Cub
8 posts
• Page 1 of 1
M
by DanR » Mon Nov 29, 2010 8:45 am
Does anyone have a picture of the radiator shutter linkage on an M? Thanks
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
- DanR
- 501 Club
- Posts: 1612
- Joined: Fri Dec 22, 2006 6:28 am
- Location: Tennessee East
- Zip Code: 37743
- Circle of Safety: Y
Re: M
by Mr E » Mon Nov 29, 2010 10:35 am
DanR wrote:Does anyone have a picture of the radiator shutter linkage on an M? Thanks
Dan, I have an H with shutters. Do you know if the linkage is similar? If so, I'll be happy to get you some pictures of that.
In the middle of every difficulty lies opportunity. - Albert Einstein
Roy Edenfield
Deep South CubFest
February 14 & 15, 2014
Roy Edenfield
Deep South CubFest
February 14 & 15, 2014
-
Mr E - 501 Club
- Posts: 4861
- Joined: Mon Jul 30, 2007 11:48 am
- Location: FL, Sneads
- Zip Code: 32460
- eBay ID: noles1432460
- Circle of Safety: Y
Re: M
by dirtyred » Mon Nov 29, 2010 7:20 pm
which end do you need a pic of?
He that tilleth his land shall be satisfied with bread: Proverbs 12:11
-
dirtyred - 501 Club
- Posts: 1382
- Joined: Sun Aug 02, 2009 11:52 am
- Location: statenville ga
- Zip Code: 31648
- Tractors Owned: 1949 farmall cub (tinkerbell) 1949 allis chalmers(ole bess) 1949-50 ?john deere model a
Re: M
by DanR » Tue Nov 30, 2010 8:02 am
I think I have it figured out. Problem was every piece is bent, broken, or modified. This application is not typical IH. Things like cotter pins backwards and moving the water pump because one piece is 1/8" too long. Must have been engineered by someone from the other side.
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
- DanR
- 501 Club
- Posts: 1612
- Joined: Fri Dec 22, 2006 6:28 am
- Location: Tennessee East
- Zip Code: 37743
- Circle of Safety: Y
Re: M
by Phillip W. Lenke » Wed Dec 01, 2010 9:15 am
Dan
I have a shutter stystem on our M.
Let me know what you need,
Phil
I have a shutter stystem on our M.
Let me know what you need,
Phil
"Work Hard ,Play Often,Care Always"
- Phillip W. Lenke
- 501 Club
- Posts: 1474
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
Re: M
by DanR » Wed Dec 01, 2010 9:29 am
Thanks Phil, I'm going to make a new long rod today. The old one has too many bends to be straightened properly. I'll know better after I get that in.
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
- DanR
- 501 Club
- Posts: 1612
- Joined: Fri Dec 22, 2006 6:28 am
- Location: Tennessee East
- Zip Code: 37743
- Circle of Safety: Y
Re: M
by Phillip W. Lenke » Wed Dec 01, 2010 10:57 am
Just a heads up it has a drop of 3 inches and an offset of 1 inch.
5/16 rod
The travel for the threads is 3/4 inch to open and shut the shutters.
Things i have found to make the new offset rod that attaches to the crank
Phil
5/16 rod
The travel for the threads is 3/4 inch to open and shut the shutters.
Things i have found to make the new offset rod that attaches to the crank
Phil
"Work Hard ,Play Often,Care Always"
- Phillip W. Lenke
- 501 Club
- Posts: 1474
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
Re: M
by DanR » Thu Dec 02, 2010 7:43 am
Yikes! Glad I found out before I did anything.
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
- DanR
- 501 Club
- Posts: 1612
- Joined: Fri Dec 22, 2006 6:28 am
- Location: Tennessee East
- Zip Code: 37743
- Circle of Safety: Y
8 posts
• Page 1 of 1
Return to Farmall M, Super M, 400, 450, & 560
Who is online
Users browsing this forum: No registered users and 1 guest
|
|