making support rods(last of the pics)

Got a project that you are working on that is not a tractor? Maybe a barn to hold your tractors or just fun stuff like woodworking, glass, tools, sheds, gardens, custom implements, etc., this is the place to talk about it.

Moderator: Team Cub

User avatar
John(videodoc)
10+ Years
10+ Years
501 Club
501 Club
Posts: 6532
Joined: Mon Jul 25, 2005 10:16 pm
Zip Code: 61944
Tractors Owned: -
55 F-Cub - snow plow and chains
3 Demonstrators Restored.
"Bette" - 22 mower
"Roxie" - 144 Complete Cults'
"Sandy"(Done) 193 Plow
1950 Demo, "Billie"
-(Woods 59")
Corn Stalk Cutter
23a Disc
&
2005 Mahindra w/FEL
Circle of Safety: Y
Location: IL, Paris just off of Interstate 70

Re: making support rods

Postby John(videodoc) » Fri Jan 07, 2011 8:15 am

Sweet!

User avatar
Rick Prentice
Team Cub Guide
Team Cub Guide
501 Club
501 Club
Posts: 5360
Joined: Mon Nov 01, 2004 7:24 am
Zip Code: 43522
Tractors Owned: 47(circle cub),48(Floyd),49,50demo from GW's collection),51,52(backhoe),53,54,55(Nickles)
Circle of Safety: Y
Location: OH, Grand Rapids (historical town along the Maumee River)

Re: making support rods(last of the pics)

Postby Rick Prentice » Fri Jan 07, 2011 7:11 pm

Here's the final steps in making the braces. It requires the indexing head to be set up on the Jet mill. I mill flats on each rod that allows turning or holding each piece as it's either tightened or adjusted. The indexing head allows me to mill a flat every 90 degrees.
Image

I line everything up so I know when I'm almost finished, plus that helps me to not forget anything.
Image

After the flats are all milled, I file each piece to remove any burrs, then into the sandblaster they go. Here's what they look like after the hot rolled slag is all blasted off. That's actual steel, not silver paint.
Image

A heavy coat of primer so they don't rust during shipping
Image

and things are almost ready to ship
Image

That's about it with the process. You can see it's just not something that can be done in a couple hours. They actually are quite time consuming, but it keeps me out of trouble and keeps my mind thinking.

Thanks for viewing,
Rick(KubKraft)
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"

User avatar
Barnyard
Team Cub
Team Cub
501 Club
501 Club
Posts: 19942
Joined: Tue Aug 07, 2007 3:39 pm
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety: Y
Location: OH, New Haven (Hamilton County)

Re: making support rods(last of the pics)

Postby Barnyard » Fri Jan 07, 2011 7:20 pm

Looks good Rick. I guess those can be added to this page http://www.kubkraft.com/brace_production.htm. :D

Barny (busy downloading pix) Ard
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Circle of Safety

User avatar
Ben B
5+ Years
5+ Years
Cub Star!!
Cub Star!!
Posts: 377
Joined: Fri Apr 09, 2010 4:49 am
Zip Code: 24354
Tractors Owned: 1950 Farmall Cub (post demo)
MTD Cub Cadet 42
MTD Cub Cadet 54
Circle of Safety: Y
Location: Southwest Virginia

Re: making support rods(last of the pics)

Postby Ben B » Sat Jan 08, 2011 9:03 am

You really do an extraordinary job. Most production outfits don't bother to blast off the mill scale before they primer or paint things. It's good to see people out there who still go the extra mile to make a top notch product. I'm very impressed!


Return to “Projects Forum”

Who is online

Users browsing this forum: No registered users and 0 guests