Snow thrower will not sit level

IHC Cub Cadet Forum -- Questions and answers to all of your Cadet related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Snow thrower will not sit level

Postby pharmerphil3 » Sat Jan 29, 2011 3:39 pm

Good Day All!
I recently purchased a QA-42 snow thrower, and attached it to my 125. I have had plenty of opportunities to use it, and it works just fine. I am however having a problem with it sitting level. Regardless if it is suspended, or on the ground, the right side of the snow thrower sits off the ground, and when the unit is raised the right side is higher than the left. I read the manual, didn’t see any reference for leveling adjustment. What am I doing wrong? :? Any help would be appreciated.
Phil
User avatar
pharmerphil3
5+ Years
5+ Years
 
Posts: 913
Joined: Sat Apr 22, 2006 11:10 am
Location: CT, Monroe
Zip Code: 06468
Tractors Owned: 1948 Cub
1955 Cub
1961 Cub
1963 Cub
1964 Cub Cadet 70
1969 Cub Cadet 125
100 Spreader
144 Cultivator
3 Field Cultivator
22 Sickle Mower
193 Plow
54-Plow
59 Wood's Mower
2030 John Deere
Circle of Safety Award
Circle of Safety: Y

Re: Snow thrower will not sit level

Postby ssettje » Sun Jan 30, 2011 9:55 pm

Sometimes it is a bit hard to get those front mounts to seat in place.It sounds like it may be a bit bent... however first check to make sure the vertical sliding joint is free to move up and down. Check to see if anthing looks bent. It should sit flat on the ground.
They work pretty good once you get the hang of speed and snow conditions.
ssettje
 
Posts: 18
Joined: Wed Dec 01, 2010 9:00 pm
Location: Cumberland RI
Zip Code: 02864
Tractors Owned: Cub Cadet 107
CUB Cadet GT 1554
Simplicity Broadmoor

Re: Snow thrower will not sit level

Postby Jim Becker » Sun Jan 30, 2011 9:56 pm

Check the pressure in your rear tires :).
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11925
Joined: Sun Feb 02, 2003 3:14 pm
Location: MN
Zip Code: 55319
Circle of Safety Award
Circle of Safety: Y

Re: Snow thrower will not sit level

Postby wdeturck » Mon Jan 31, 2011 1:57 pm

And the front ones :mrgreen:
The Geezer from IHregistry.com which crashed and is now Cub Cadet Collectors.
User avatar
wdeturck
10+ Years
10+ Years
 
Posts: 949
Joined: Mon Dec 08, 2003 6:15 am
Location: PA Oakmont 15139

Re: Snow thrower will not sit level

Postby Flatbedford » Fri Feb 11, 2011 8:26 pm

I have the same problem with mine QA36. When I tighten the belt, the left side drops more than the right. I Give the sliding plate a few knocks with a hammer and the right side to even it out. It sort of works. I will have to look more closely and see it something is bent or binding.
Steve
Cub Cadet 125 Three Point, Spring Assist
Cub Cadet 149 Three Point
Front blades, QA36A, 42" decks, Rear Blade
User avatar
Flatbedford
 
Posts: 2
Joined: Tue Apr 27, 2010 3:24 pm
Location: Lower NY
Zip Code: 10520
Tractors Owned: Cub Cadet 125


Return to Cub Cadet Forum

Who is online

Users browsing this forum: No registered users and 1 guest