This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

New part numbers for some SA seals and gasket

Farmall Super A, AV, 100, 130, & 140 1939 - 1973
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
Dale Finch
10+ Years
10+ Years
Posts: 6645
Joined: Tue Apr 27, 2010 11:34 am
Zip Code: 27517
Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower
Circle of Safety: Y
Location: NC, Chapel Hill

New part numbers for some SA seals and gasket

Postby Dale Finch » Wed Mar 02, 2011 5:25 pm

You guys probably already know these new part numbers, and maybe there is a location to post them...certainly would like to find that if so! The page and ref # are from the SA Parts Book from Binders:

Rear Axle Oil Seal pg.172/#26 OLD: #43283D NEW: #71697C1
Belt Pulley Shaft Oil Seal pg. 268/#49 OLD: #48954D NEW: #71700C1
PTO Drive Housing Gasket pg. 268/#28 OLD: #60589DA NEW: #1342405C1

I'm pretty sure that there was a cross reference page for the cub for things like bearings...is there one for the SA? Can most bearings be purchase from NAPA or the like?

I have 2 different thicknesses of gasket material. I'm having trouble finding a few gaskets:

PTO Belt Pulley Bearing Cage Gasket pg. 270/#47 #47283D
Diff. Shaft Bearing Cover Gasket pg. 173/#2 #48009DA
Rear Axle Bearing Retainer Gasket pg. 174/#28 #48009DA
X-miss. Case Cover Gasket pg. 167/#15 #47279DA

If I cannot find them, can I use the gasket material as long as it is approximately the same thickness and material? i.e. are the various "paper" gasket materials unique?

Dale
Dale Finch
Image
Circle of Safety

SPONSOR AD

Sponsor



Sponsor
 

User avatar
Super A
10+ Years
10+ Years
Posts: 5229
Joined: Mon Jan 26, 2004 10:53 am
Zip Code: 28521
Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
Circle of Safety: Y
Location: NC, Jacksonville area

Re: New part numbers for some SA seals and gasket

Postby Super A » Thu Mar 03, 2011 1:23 pm

Take the IH numbers to Napa or wherever, they may be able to cross reference them. Also give Clapp Bros. in Siler City a call. They're probably the closest caseIH dealer to you. Most everything you need is readily available from caseIH.

Al
White Demo Super A Restoration Updates

Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022

User avatar
Dale Finch
10+ Years
10+ Years
Posts: 6645
Joined: Tue Apr 27, 2010 11:34 am
Zip Code: 27517
Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower
Circle of Safety: Y
Location: NC, Chapel Hill

Re: New part numbers for some SA seals and gasket

Postby Dale Finch » Thu Mar 03, 2011 6:57 pm

Yes, I think I should buy stock in Clapp Bros, I have spent so much money there, between the Cub last year and now the Super A!! They just provided 3 of the last gaskets I needed. Also, in Siler City...a new Tractor Supply Co...looks like I need to visit Siler City in the near future!

"Super A", I assume you have a Super A, right? If so, have you ever rebuilt the touch control? I have torn apart the PTO, Steering housing, and have just removed the touch control, with thoughts of rebuilding it. Or I may just use the one from the parts SA which i know functioned. Let me know your opinion. Anyone else, please chime in, too!

Dale
Dale Finch
Image
Circle of Safety

User avatar
Super A
10+ Years
10+ Years
Posts: 5229
Joined: Mon Jan 26, 2004 10:53 am
Zip Code: 28521
Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
Circle of Safety: Y
Location: NC, Jacksonville area

Re: New part numbers for some SA seals and gasket

Postby Super A » Thu Mar 03, 2011 6:59 pm

BDFinch wrote:Yes, I think I should buy stock in Clapp Bros, I have spent so much money there, between the Cub last year and now the Super A!! They just provided 3 of the last gaskets I needed. Also, in Siler City...a new Tractor Supply Co...looks like I need to visit Siler City in the near future!

"Super A", I assume you have a Super A, right? If so, have you ever rebuilt the touch control? I have torn apart the PTO, Steering housing, and have just removed the touch control, with thoughts of rebuilding it. Or I may just use the one from the parts SA which i know functioned. Let me know your opinion. Anyone else, please chime in, too!

Dale


I have never done a Super A. Did a Cub Touch Control once. My honest opinion is if it does not leak, and if it will lift stuff like it's supposed to without a lot of "burping," I would leave it alone.

Al
White Demo Super A Restoration Updates

Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022

User avatar
Dale Finch
10+ Years
10+ Years
Posts: 6645
Joined: Tue Apr 27, 2010 11:34 am
Zip Code: 27517
Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower
Circle of Safety: Y
Location: NC, Chapel Hill

Re: New part numbers for some SA seals and gasket

Postby Dale Finch » Thu Mar 03, 2011 7:13 pm

Sounds good...I think I have enough to do for now...I can always rebuild one of the ones I will not use, "just for fun", later on. Then if the one I DO use is leaking, I can just swap it out.

Dale
Dale Finch
Image
Circle of Safety


Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: No registered users and 4 guests