130 pto

Farmall 100, 1954 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

130 pto

Postby jwmcd » Thu Mar 10, 2011 10:06 am

I am working on a farmall 130. The pto shaft seal leaks. I have removed the housing, but cannot get any gear puller I have to fit the gear. Not enough clearance between the gear and the housing. The manuals I have are not clear on how to remove shaft and seal. Any suggestions? Thanks, jwmcd
jwmcd
 
Posts: 38
Joined: Thu Mar 10, 2011 9:56 am
Location: Greenwood, SC
Zip Code: 29648
Tractors Owned: Farmall Cub, A, Super A, 130. JD 3020, 4020, 5020.

Re: 130 pto

Postby artc » Thu Mar 10, 2011 10:15 am

i'll look at my super A tonight. i've got to take it apart anyway
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org
User avatar
artc
Cub Pro
Cub Pro
 
Posts: 1750
Joined: Sun Mar 30, 2003 10:25 am
Location: CT, Middletown
Zip Code: 06457
eBay ID: cmtelephone
Tractors Owned: 1950 cubs (3), 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial.1948 super AI (trailer queen), 1958 450.

Re: 130 pto

Postby artc » Fri Mar 11, 2011 4:26 pm

the gear can be removed using a std 3 jaw puller inserted in the three internal holes in the gear after removing the bolt and washer, of course. i reinstalled the bolt without the washer to push against.

then remove the woodruff key, and drive the pto shaft out of the housing. the two bearings are the same IHC L-230 (1206AG Timkin)
now the seal can be changed.

hope this helps, art
Last edited by artc on Tue Mar 15, 2011 8:49 am, edited 1 time in total.
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org
User avatar
artc
Cub Pro
Cub Pro
 
Posts: 1750
Joined: Sun Mar 30, 2003 10:25 am
Location: CT, Middletown
Zip Code: 06457
eBay ID: cmtelephone
Tractors Owned: 1950 cubs (3), 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial.1948 super AI (trailer queen), 1958 450.

Re: 130 pto

Postby jwmcd » Sat Mar 12, 2011 9:49 am

Thanks Art. Very helpful info. I kinda thought that was the way, but neither of my gear pullers would fit in the holes. Now to find a smaller size puller. John
jwmcd
 
Posts: 38
Joined: Thu Mar 10, 2011 9:56 am
Location: Greenwood, SC
Zip Code: 29648
Tractors Owned: Farmall Cub, A, Super A, 130. JD 3020, 4020, 5020.

Re: 130 pto

Postby jwmcd » Wed Mar 16, 2011 9:06 am

I finally got it off. Thanks again for your help Art.>>John
jwmcd
 
Posts: 38
Joined: Thu Mar 10, 2011 9:56 am
Location: Greenwood, SC
Zip Code: 29648
Tractors Owned: Farmall Cub, A, Super A, 130. JD 3020, 4020, 5020.


Return to Farmall 100 Series, 100, 130, 140

Who is online

Users browsing this forum: No registered users and 2 guests