IH CUB LoBoy Series - 154, 184, 185 Discussion Forum
Moderator: Team Cub
by Dave in Md » Mon May 16, 2005 11:07 am
On my way home from work on Friday I stopped by the closest parts supplier to pick up a couple of seals and gaskets so I can start getting the Cub closer to being in one piece again. As I was pulling onto their lot a yellow and white loboy got my attention. It was sitting out along the road with the ZT mowers the place sells. I walked over and looked at it. Not to bad, surface rust scattered all over, some stuff missing from the dash I guess because of the un-filled holes, belly mower, decent tread on turf tires, over-all appearance would be very well used but not beat to death. I asked about it while Buck, the counter man, was looking for my parts. He told me it ran well and was traded on a new(er) mower. I asked about the price... $3650. Any thoughts I'd had of adding it to my little stable went screaming out the window. Does this price sound in line? I'd have guessed about $1K lower.
Dave
-
Dave in Md
-
- Posts: 49
- Joined: Sun Oct 24, 2004 7:03 am
by John *.?-!.* cub owner » Mon May 16, 2005 11:51 am
About 1k to 1.2k too high for my part of the country (eastern Mo.).
"The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government lest it come to dominate our lives and interests." Patrick Henry
-

John *.?-!.* cub owner
- Team Cub

-
- Posts: 17759
- Joined: Sun Feb 02, 2003 2:09 pm
- Location: Mo, Potosi
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
by Albie » Mon May 16, 2005 12:35 pm
I have on ebay a 154 with a 60 inch belly mower plus a two arm loader and runs good for a better price new rear tires and front tires good.
Front and rear lights and Hydraulics No holes no rust as metal is good.
Send your e mail address and I can send pictures. AlBie[/img]
-
Albie
-
- Posts: 36
- Joined: Thu May 29, 2003 8:39 am
- Location: Pennsylvania
Return to LoBoy Series - 154, 184, 185
Who is online
Users browsing this forum: Bob McCarty and 0 guests
|
|