Main metering jet

IH CUB LoBoy Series - 154, 184, 185 Forum -- Questions and answers to all of your LoBoy related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Born1928
5+ Years
5+ Years
Posts: 9
Joined: Wed Nov 10, 2010 9:34 pm
Zip Code: 78602

Main metering jet

Postby Born1928 » Sat Mar 26, 2011 8:30 pm

I believe I have tracked the engine running problems on my 154 Lo Boy to the main metering jet on the installed Zenith carbuetor. The carb is obviously a retrofit form the OEM IH carb. I'm not sure it's the same as the 68YYT Zenith pictured in the shop manual. For instance, the shop manual calls for a size 21 jet. The one in my carbuetor is a #19. Looking at the orifice the diameter seems too small to effectively pull fuel from the float bowl. Of course, since I am not an expert on carburetors I could be wrong. I have looked over the various sites concrning parts for the Zenith and it looks almost impossible to purchase a main metering jet alone. My carbuertor has been cleaned thoroughly and I do not believe I need an entire carbuetor repair kit. Any sources members may know of?

User avatar
Don McCombs
Team Cub Mentor
Team Cub Mentor
501 Club
501 Club
Posts: 12114
Joined: Mon Feb 03, 2003 6:45 am
Zip Code: 21550
Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
1951 Farmall Super C w/FH
Circle of Safety: Y
Location: MD, Deep Creek Lake

Re: Main metering jet

Postby Don McCombs » Sun Mar 27, 2011 8:32 am

Try these folks...

Wahlberg-McCreary, Inc.
3810 Dacoma
Houston, TX 77092
Phone: 713-684-0022 or 866-215-7918
Fax: 713-684-0020
Don McCombs
MD, Deep Creek Lake

Image
Proud Member of Maryland Chapter 39

patterdale
5+ Years
5+ Years
Posts: 4
Joined: Fri Jan 21, 2011 6:44 pm
Zip Code: 56586

Re: Main metering jet

Postby patterdale » Mon Mar 28, 2011 6:16 am

If you can't find the jet you could do a little research and find out what the correct "numbered" size drill bit is and just drill the old one out.

BigBill
10+ Years
10+ Years
501 Club
501 Club
Posts: 6043
Joined: Sat Jul 22, 2006 5:02 pm
Zip Code: 00000
Location: in northern usa

Re: Main metering jet

Postby BigBill » Tue Apr 05, 2011 3:30 pm

Try mcdonalds carbuerator i'll get back here with a web address he has all kinds of carb parts. I get all my carb kits from him(zenith & IH) one stop shopping for both.

Go to; http://www.mcdonaldcarb.com
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.


Return to “LoBoy Series - 154, 184, 185”

Who is online

Users browsing this forum: No registered users and 1 guest