Anyone know the best way to remove the PTO Shaft Oil Seal? I have the PTO off the tractor and dissassemled from the Belt Pulley unit. I started to remove the Power Takeoff Gear (on the inside) so I could push the whole shaft out, giving me better access, but decided to try from the outside. Began digging at it (remembered it was a bear on the Cub, too) but have only managed to get about half of it out. Now it's a mess, and probably too late, I am seeking advice. It looks like it goes on forever! My only consolation is that I have the luxury of having a second PTO if I totally screw this one up!
I don't think I have done any damage...yet!
Dale #2
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
SA PTO Seal removal
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 6684
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: SA PTO Seal removal
crimp the edge in with a small chisel take your time if it is the original it is very think. It will come out
Just take your time
Boss
Just take your time
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
- Posts: 6684
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: SA PTO Seal removal
Yeah, that's pretty much what I had done, but it just keeps going! I almost think it must be two, back to back. I know the old ones were much thicker, and the belt pulley one I got out OK and it was about 3/4" thick. But this one would have to be at least 2" thick. Hmmmmm... I'm leaning toward going back to the other side, but getting that PTO Gear off didn't go very easily, that's why I started "digging". I'll start on it again tomorrow and see how it goes.
Dale #2
Dale #2
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: SA PTO Seal removal
I have never dealt with a super A, but on the H, many of the seals were 2 separate seals in a single housing. When you got the seals out you still had a shell that had held them together that needs to be removed. They are really tight.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Re: SA PTO Seal removal
Dale - keep diggin' until you hit paydirt!
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 6684
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: SA PTO Seal removal
Yes, we already got a double seal out...guess it was felt and leather? There was a spring with the first. The reason I think we hit a second is that we got the "housing" for the first out, then got a cover plate for the second out and now there is a second spring...with that big ole' housing again! I should reach China by lunchtime!!
I'll just keep digging!
Dale #2
I'll just keep digging!
Dale #2
-
- Cub Pro
- Posts: 1871
- Joined: Sun Mar 30, 2003 10:25 am
- Zip Code: 06457
- eBay ID: cmtelephone
- Tractors Owned: Restored: 1950 Cub, 1950 Cub Demo, 1948 super AI, 1935 Silver King, 1946 Oliver 60 RC, John Deere M, 1950 C demo.
In working clothes:
1950 cub, 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial. IH 450, 1963, another 1948 cub, 1946 I6 with Trogan front blade. - Location: CT, Middletown
Re: SA PTO Seal removal
you need to remove the pto gear, remove the shaft from the housing, and then it will come out. its just as John *.?-!.* cub owner said. once you remove doth sections of the seal, you can fold the shell inward with a punch or a screwdriver. fold it in 3 places and remove it.
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org
http://www.ZagrayFarmMuseum.org
-
- 10+ Years
- Posts: 6684
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: SA PTO Seal removal
Thanks ARTC...tomorrow's project (maybe!). I needed to get away from it for a bit, so went out to the "donor" SA and stole its left final drive! I'll either start rebuilding that so it can be swapped with the previously repaired one, or maybe I'll tackle the PTO again. I WILL try removing the gear and shaft. Thanks...
Dale #2
Dale #2
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Camshaft removal issue on C-113
by Debovsky » Sun Jan 30, 2022 3:06 am » in Farmall A, Super A, AV, 100, 130 & 140 - 4
- 372
-
by Debovsky
Mon Jan 31, 2022 1:51 am
-
-
-
Super AV Radiator Removal?
by customcutter » Mon Mar 20, 2023 6:01 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 6
- 270
-
by inairam
Wed Mar 22, 2023 6:09 am
-
-
-
Glass bowl gasket/seal
by ChickenMan » Sat Mar 02, 2024 1:27 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 6
- 179
-
by ChickenMan
Sun Mar 03, 2024 6:32 pm
-
-
-
Front main oil seal: major mission creep Attachment(s)
by R.D.Owens » Wed May 10, 2023 7:33 am » in Farmall A, Super A, AV, 100, 130 & 140 - 6
- 1139
-
by inairam
Wed May 31, 2023 5:54 am
-
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 1 guest