This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Enamel Reducer
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 489
- Joined: Sat Nov 01, 2008 7:05 pm
- Zip Code: 30152
- Tractors Owned: 1948, 1949, 1953, 1961 Cubs
1941 Minneapolis Moline
1939 John Deere H
1986 IMT 539
Multiple Ford 8Ns that aren't any good - Location: Kennesaw, GA
Enamel Reducer
I normally buy my paint from Napa, but this time I bought 2150 red from the Case dealer.
When I called Napa to get the reducer, they told me I needed to get it from the place I bought the paint.
The Case dealer is three hours from my house and I don't remember seeing reducer there anyway.
Does anyone know what I should ask for at Napa? I thought enamel reducer was pretty much the same all around.
While we are at it, what kind of hardener should I ask for? I have the fresh air machine, so no worries there.
When I called Napa to get the reducer, they told me I needed to get it from the place I bought the paint.
The Case dealer is three hours from my house and I don't remember seeing reducer there anyway.
Does anyone know what I should ask for at Napa? I thought enamel reducer was pretty much the same all around.
While we are at it, what kind of hardener should I ask for? I have the fresh air machine, so no worries there.
"If every day were a holiday, sport would soon become chore"
-
- 10+ Years
- Posts: 2729
- Joined: Sun Oct 03, 2004 7:11 am
- Zip Code: 03848
- eBay ID: panelbeata
- Tractors Owned: 1947 circle cub
1950 cub demonstrator
1957 cub
1967 cub - Circle of Safety: Y
- Location: NH, Kingston
Re: Enamel Reducer
napa enamel reducer should work fine.
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: Enamel Reducer
NAPA should be fine - Dupont Centari works well as does the Nason line if you have an Automotive Paint Supply House in your area.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 916
- Joined: Sun Feb 02, 2003 10:44 pm
- Zip Code: 60936
- Tractors Owned: 47 Cub SN 8664
48 Cub
50 Demo
54 Cub
3-55 Cub
2-56 Cub
55 LOBOY SN 876
57 LOBOY
58 French Cub
2- 60 LOBOY
69 Cub
54 Super M
42 H
48 H
57 300LP
57 450
Cub Cadet 123
Cub Cadet 149 - Circle of Safety: Y
- Location: Gibson City, IL
Re: Enamel Reducer
My uncle painted cars years ago and gave me a 5 gal bucket of Dupont 3812 enamel reducer he had sitting around. I use it with my IH paint with good success. I also use it with Van Sickle paint that I use on my implements. I use the cheap hardner for my local farm store to, I think it is valspar or Diamond Vogel??
Good Luck
Good Luck
-
- 10+ Years
- Posts: 489
- Joined: Sat Nov 01, 2008 7:05 pm
- Zip Code: 30152
- Tractors Owned: 1948, 1949, 1953, 1961 Cubs
1941 Minneapolis Moline
1939 John Deere H
1986 IMT 539
Multiple Ford 8Ns that aren't any good - Location: Kennesaw, GA
Re: Enamel Reducer
panelbeater wrote:napa enamel reducer should work fine.
Right. But Napa wouldn't sell me "enamel reducer". Apparently they have multiple variations? I just need to know what to ask for.
Maybe I just need to call back when someone else answers the phone....
And if they won't sell me a universal reducer, I didn't figure it was even worth asking about the hardener or a clear coat.
"If every day were a holiday, sport would soon become chore"
-
- 10+ Years
- Posts: 2729
- Joined: Sun Oct 03, 2004 7:11 am
- Zip Code: 03848
- eBay ID: panelbeata
- Tractors Owned: 1947 circle cub
1950 cub demonstrator
1957 cub
1967 cub - Circle of Safety: Y
- Location: NH, Kingston
Re: Enamel Reducer
tractor supply sells enamel reducer and hardener
-
- 10+ Years
- Posts: 2253
- Joined: Fri Sep 10, 2010 5:23 pm
- Zip Code: 39861
- Tractors Owned: 76 Cub Denim Springs
49 Cub Denim Springs
51 Cub Uncle Harvey
"Jacksonville" 53 Cub
"Jackson" 76 Cub
"Louie" 64 Cub Fast Hitch
"Paw Paw"71 Cub Fast
Hitch
"Alvin" 72 Cub
"Ugly" 75 Cub
76 Cub Val
Mr. Kirkland" 77 Red Cub
77 Cub "Russell
76 Cub w/fast hitch "Edgar"
76 - 185 Cub Lo Boy
John Deere 2003 - 5320
Kubota 7060
Kubota 5400
Kubota 2680
John Deere 445
TO20 Ferguson - Circle of Safety: Y
- Location: Jakin Georgia
Re: Enamel Reducer
Sounds to me like you might need to find a different Napa store???
"I ain't believing this!"
-
- 10+ Years
- Posts: 489
- Joined: Sat Nov 01, 2008 7:05 pm
- Zip Code: 30152
- Tractors Owned: 1948, 1949, 1953, 1961 Cubs
1941 Minneapolis Moline
1939 John Deere H
1986 IMT 539
Multiple Ford 8Ns that aren't any good - Location: Kennesaw, GA
Re: Enamel Reducer
tezell63 wrote:Sounds to me like you might need to find a different Napa store???
Well, it isn't that easy. There is one Napa store that sells paint, etc. and all the local stores order from that paint location. So I just call them direct and get a part #, then order through my local store.
I love Napa.
"If every day were a holiday, sport would soon become chore"
-
- 10+ Years
- Posts: 2253
- Joined: Fri Sep 10, 2010 5:23 pm
- Zip Code: 39861
- Tractors Owned: 76 Cub Denim Springs
49 Cub Denim Springs
51 Cub Uncle Harvey
"Jacksonville" 53 Cub
"Jackson" 76 Cub
"Louie" 64 Cub Fast Hitch
"Paw Paw"71 Cub Fast
Hitch
"Alvin" 72 Cub
"Ugly" 75 Cub
76 Cub Val
Mr. Kirkland" 77 Red Cub
77 Cub "Russell
76 Cub w/fast hitch "Edgar"
76 - 185 Cub Lo Boy
John Deere 2003 - 5320
Kubota 7060
Kubota 5400
Kubota 2680
John Deere 445
TO20 Ferguson - Circle of Safety: Y
- Location: Jakin Georgia
-
- 10+ Years
- Posts: 691
- Joined: Tue Jun 06, 2006 10:37 pm
- Location: Janesville, IA
Re: Enamel Reducer
The only differences in enamel reducer I know of is temperature ratings. Enamel reducer is enamel reducer.
I prefer not to use the Case IH reducer. It dries too slow. Enamel reducer works much better in my opinion.
I prefer not to use the Case IH reducer. It dries too slow. Enamel reducer works much better in my opinion.
1949 Project Cub
1955 Cub Lo-Boy "Jack"
1957 Cub Lo-Boy "Mac"
1957 Cub with 5' Woods Belly Mower "James"
24 other Farmalls A thru SMTA.
1955 Cub Lo-Boy "Jack"
1957 Cub Lo-Boy "Mac"
1957 Cub with 5' Woods Belly Mower "James"
24 other Farmalls A thru SMTA.
-
- 10+ Years
- Posts: 1750
- Joined: Sun Feb 02, 2003 1:09 pm
- Zip Code: 64784
- Circle of Safety: Y
- Location: Mo, Sheldon
Re: Enamel Reducer
I didn't know you had to use anything special, I just use mineral spirits and add Japan drier which I get from any old paint store.
Jim Turner
-
- 10+ Years
- Posts: 691
- Joined: Tue Jun 06, 2006 10:37 pm
- Location: Janesville, IA
Re: Enamel Reducer
What is a Japan dryer? Are you talking about a hardener? Mineral spirits will cut the 2150. But it dries very slow. It is a cleaner which is designed to evaporate slow. Try enamel reducer sometime and see the difference.
1949 Project Cub
1955 Cub Lo-Boy "Jack"
1957 Cub Lo-Boy "Mac"
1957 Cub with 5' Woods Belly Mower "James"
24 other Farmalls A thru SMTA.
1955 Cub Lo-Boy "Jack"
1957 Cub Lo-Boy "Mac"
1957 Cub with 5' Woods Belly Mower "James"
24 other Farmalls A thru SMTA.
-
- 10+ Years
Re: Enamel Reducer
I have always considered a reducer for paint as an equivalent to the chemical the manufacturer lists on the can as the cleanup material. Enamel reducer is probably just a fancy way (or more expensive way) of wording it. I agree with Jim, a slow drying reducer is sometimes better when spraying in high humidity, allows any moisture to evaporate and eliminate "blushing". A reducer is only thinning the paint material to a sufficient viscosity which is better for the atomization out of your spray gun.
-
- 10+ Years
- Posts: 691
- Joined: Tue Jun 06, 2006 10:37 pm
- Location: Janesville, IA
Re: Enamel Reducer
Brian, the blushing you are referring to is more often called solvent pop. This happens when a paint itself is skinning over and all the solvent hasn't fully evaporated out. It typically happens more often when painting when humidity is high. But an incorrect solvent can also cause this.
1949 Project Cub
1955 Cub Lo-Boy "Jack"
1957 Cub Lo-Boy "Mac"
1957 Cub with 5' Woods Belly Mower "James"
24 other Farmalls A thru SMTA.
1955 Cub Lo-Boy "Jack"
1957 Cub Lo-Boy "Mac"
1957 Cub with 5' Woods Belly Mower "James"
24 other Farmalls A thru SMTA.
-
- 10+ Years
- Posts: 1631
- Joined: Fri Dec 22, 2006 6:28 am
- Zip Code: 37743
- Circle of Safety: Y
- Location: Tennessee East
Re: Enamel Reducer
Clear coat is not compatible with enamel. The body man says he uses acetone and no hardener. He turns out a great paint job.
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 37
- 1048
-
by Jim Becker
Sat Dec 04, 2021 10:49 pm
Who is online
Users browsing this forum: Majestic-12 [Bot] and 5 guests