can I use a middlebuster plow on my 154 lo boy

IH CUB LoBoy Series - 154, 184, 185 Forum -- Questions and answers to all of your LoBoy related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

can I use a middlebuster plow on my 154 lo boy

Postby vicdanna » Fri Apr 29, 2011 7:52 pm

I have a 154 lo boy with turf tires and would like to use a middle buster plow to set up a small orchard. Is this feasable? It has a class 1 3 point hitch and a creeper gear. I bought a middle buster plow at central tractor, it fits but I would like to know if anyone has done this before I try it.
vicdanna
 
Posts: 2
Joined: Fri Apr 29, 2011 7:45 pm
Zip Code: 14735

Re: can I use a middlebuster plow on my 154 lo boy

Postby SONNY » Fri Apr 29, 2011 11:05 pm

You probably wont get enough traction with bare tires, but could put tire chains on and do ok.---these little tractors were not intended to use as farm tractors,---they are just lawn mowers!---If your clutch and driveshaft are good and tight fitting, you can do a test pull of 10 feet or so and tell real quick if you can pull it or not! thanks; sonny
SONNY
5+ Years
5+ Years
 
Posts: 2239
Joined: Thu Nov 09, 2006 11:26 pm
Zip Code: 00000

Re: can I use a middlebuster plow on my 154 lo boy

Postby outdoors4evr » Sat Apr 30, 2011 2:05 pm

The clutch is not even a consideration when looking at what the weak point of the tractor is. The pin in the driveshaft is designed to go long before the clutch. The engine is only 16-18HP so in most cases, the engine stalls if you try to plow through a big rock.
Put some chains on it and pull away. Use high range if you have a creeper (creeper not engaged).
184 w/ Creeper & 3-Point
IH Model 15 Tiller
outdoors4evr
5+ Years
5+ Years
 
Posts: 715
Joined: Tue Jul 22, 2008 12:44 pm
Location: Davison, MI
Zip Code: 48423
Tractors Owned: 184

Re: can I use a middlebuster plow on my 154 lo boy

Postby SONNY » Sat Apr 30, 2011 10:11 pm

The problem is the sloppy fittin splines on the drive shaft that are easily stripped off !---How do I know???---dont ask! thanks; sonny
SONNY
5+ Years
5+ Years
 
Posts: 2239
Joined: Thu Nov 09, 2006 11:26 pm
Zip Code: 00000

Re: can I use a middlebuster plow on my 154 lo boy

Postby outdoors4evr » Mon May 02, 2011 7:51 am

That's a wear issue, not a design flaw. They fit well when new and wear over the years of use.
184 w/ Creeper & 3-Point
IH Model 15 Tiller
outdoors4evr
5+ Years
5+ Years
 
Posts: 715
Joined: Tue Jul 22, 2008 12:44 pm
Location: Davison, MI
Zip Code: 48423
Tractors Owned: 184

Re: can I use a middlebuster plow on my 154 lo boy

Postby Landreo » Mon May 02, 2011 10:10 am

I use a TSC middle buster on my 154 with Ag tires, no weights, and it does fine in clay and sod. I am not sure how well it would work with turf tires but I would not worry about breaking anything.
Landreo
5+ Years
5+ Years
 
Posts: 956
Joined: Tue Oct 19, 2004 7:10 am
Location: SC, Ridgeway
Zip Code: 29130
Tractors Owned: fcub
1 cyl fcub
154
Earthmaster
JD 40MT
JD 420 crawler-loader
D-2 Cat dozer
AC Model C
Cub Cadets
Red-E
Circle of Safety Award
Circle of Safety: Y

Re: can I use a middlebuster plow on my 154 lo boy

Postby prespres » Thu May 05, 2011 7:13 am

Unless you have a creeper I wouldn't. I tried it on my 154 and I kept sheering the roll pin. It has the power and the gearing to do it but a dumb clutch set up. I think part of the problem is the shaft I have was made by a machinist and it is not as tight in the pilot bushing as I would like. I've thought about installing another bearing to support the shaft which might help,
prespres
 
Posts: 4
Joined: Thu Oct 22, 2009 7:02 pm
Zip Code: 24084

Re: can I use a middlebuster plow on my 154 lo boy

Postby outdoors4evr » Thu May 05, 2011 7:30 am

PresPres, that isn't supposed to be a roll pin. The actual part number is shaped like a roll pin, but it is actually high-strength spring steel rolled up into a cylinder shape. It is much stronger than a typical roll pin. Some people use a grade 8 bolt with a locknut and then grind off the extra bolt so it clears properly. Even these fail after some time.
184 w/ Creeper & 3-Point
IH Model 15 Tiller
outdoors4evr
5+ Years
5+ Years
 
Posts: 715
Joined: Tue Jul 22, 2008 12:44 pm
Location: Davison, MI
Zip Code: 48423
Tractors Owned: 184


Return to LoBoy Series - 154, 184, 185

Who is online

Users browsing this forum: No registered users and 1 guest