IH CUB LoBoy Series - 154, 184, 185 Forum -- Questions and answers to all of your LoBoy related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
7 posts • Page 1 of 1
ive found one of these for sale. i have a ditch that borders my property and the country road that i live on. does this sickle deploy below the 90 degree range to cut the slopes of the ditch?
It depends on the model of sickle mower you are talking about. A standard Cub 22 or Lo-boy L-22 sickle mower will NOT go below 90 degrees, or work at any other angle for that matter other than flat to the ground.
They did make a Model 105 Balanced Head Mower, which will work at 45 degrees up to 45 below grade.
I've never seen one in person, and have only heard of a few people with them, so I'm guessing that they are fairly rare.
1951 Farmall Cub, Cub Cadets 102, 104, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
Remember that you have a 154 and a Cub L-22 won't fit. You are going to have to find an IH-222 Mower. It has the same limitations as the Cub-22
I've only seen one of these and it was mounted on a 184. The owner was not interested in selling.
"The probability of life originating from accident is comparable to the probability of the unabridged dictionary resulting from an explosion in a printing shop." Edwin Conklin, biologist
I went through this whole issue about a year ago. If you need a sickle bar mower that will go down into a ditch, there are really only two options; The IH105 balanced head mower, which is very rare and usually totally worn out (they were owned by state or county road maintenance departments - and if the 'crank' part of it is broken - it is over $900 for the part) - OR - the Haban sickle bar mower. The Haban mowers all had the same 'Head' with different parts to mount on many different large lawn & garden tractors. Since the 'head' of the mower contained the 'crank' it would operate in a range of +45 degrees to -45 degrees. While none of the mounting brackets were designed for a 154, you might be able to 'adapt' it to a 154 style tractor. If you are fortunate enough to have the 3 point hitch, Haban made a 3PTH model which easily interchanges belt speed between 540 RPM and 1,000 RPM PTO speed.
On Yahoo there is a Haban owners club forum that has a wealth of knowledge about the sickle mower. Check out ebay for Haban sickle bar mowers that are for sale. 'Regular' Habans seem to go for $300 to $500, but would requir 'fab' work to make them fit. 3 Point Haban Sickles seem to go for $800 to $1,000.
Hope that this helps you, NJDale
Some pictures of the Haban Sickle Bar Mower;
7 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 3 guests