Got a project that you are working on that is not a tractor? Maybe a barn to hold your tractors or just fun stuff like woodworking, glass, tools, sheds, gardens, custom implements, etc., this is the place to talk about it.
Moderator: Team Cub
I've been working to re-do my garage/shop, and now I'm down to doing the floor. The floor was painted with a Latex floor paint, which obviously didn't last with all the salt and snow falling off the cars in the winter months. So, I'm planning to sand this off and go with a real Epoxy floor coating.
I know the Rust Oleum ones at Home Depot are OK, but I only want to do this once, and I've heard that those will definitely not hold up too well.
I've been looking at the POR-15 floor coatings, and since the other POR products are so good, I figured this would be too.
Has anyone used an Epoxy floor coating that they would recommend?
1951 Farmall Cub, Cub Cadets 102, 104, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
- 501 Club
- Posts: 1990
- Joined: Mon Oct 24, 2005 11:35 am
- Location: Grand Island, NY
- Zip Code: 14072
- eBay ID: toysforjake
- Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Legacy 4x4 Diesel
- Circle of Safety: Y
I used Dura Flex coatings about 15 years ago. http://www.dur-a-flex.com/
The basement floor is holding up extremely well. It was too hot the day I did my garage and it was cooking over a little too quickly, but even still it looks goo, but a couple of areas spalled away.
I acid washed everything. The smooth coatings are extremely slippery when wet. I mean extreme. I used some quartz sand in the garage and too much shreds a mop but it is non-skid. If I did it again I would go for one of the thicker coatings with the embedded sand that they need the spiked shoes to apply. The surface texture make it less treacherous when wet. The smooth coatings are like wet ice when wet. I am saying it again as you need to think about this in a garage.
My mother's garage was coated by a friend and me back in the late 70's. Epoxies have gotten a lot better since then- they are more flexible, but even still, this one held up well too. I don't remember the formula but I doubt if the same chemistry is on the market.
bob in CT
- Cub Pro
- Posts: 5238
- Joined: Thu Jun 07, 2007 9:34 am
- Location: CT, Manchester
- Zip Code: 06040
- Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
- Circle of Safety: Y
Return to Projects Forum
Who is online
Users browsing this forum: No registered users and 2 guests