Int'l Cub Cadet 70 QUESTIONS!

IHC Cub Cadet Forum -- Questions and answers to all of your Cadet related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Int'l Cub Cadet 70 QUESTIONS!

Postby Marion(57 Loboy) » Sat May 21, 2011 4:39 pm

It has shaft drive and a fresh cast iron 7HP Kohler.
What is the WIDEST deck it will handle?
Can it pull a moldboard plow?
Did they make a snow blade for this?
I'm thinking about getting one... :roll:
User avatar
Marion(57 Loboy)
10+ Years
10+ Years
 
Posts: 660
Joined: Sat Mar 29, 2003 4:17 pm
Location: Canton, Ohio
Zip Code: 00000
Tractors Owned: 1957 International Cub Loboy; C-3 finish mower; L-54 blade; L-F194 plow incl coulter and jointer;L-38 disk harrow. Leinbach FH back blade.

Re: Int'l Cub Cadet 70 QUESTIONS!

Postby Paul B » Sat May 21, 2011 7:33 pm

Anything over a 38" deck will work it if the grass gets very tall, and the 38" or 42" cast iron end decks are what it originally had, although there was a kit available from IH to put the 38" two bladed timed deck from the Original on it.

Yes it will pull a 10" Brinly plow very well.

Yes there was a snow blade for it, same blade used for all the narrow frame tractors, although there was some differences in the sub frame that mounted it on the tractor, depending on the tractor model.
Paul B
Team Cub Guide
Team Cub Guide
 
Posts: 2338
Joined: Sat Apr 10, 2004 6:12 pm
Location: KY, Louisville
Zip Code: 40218
Circle of Safety Award
Circle of Safety: Y

Re: Int'l Cub Cadet 70 QUESTIONS!

Postby Marion(57 Loboy) » Sat May 21, 2011 8:21 pm

Thank you!
Decision time now... :?:
User avatar
Marion(57 Loboy)
10+ Years
10+ Years
 
Posts: 660
Joined: Sat Mar 29, 2003 4:17 pm
Location: Canton, Ohio
Zip Code: 00000
Tractors Owned: 1957 International Cub Loboy; C-3 finish mower; L-54 blade; L-F194 plow incl coulter and jointer;L-38 disk harrow. Leinbach FH back blade.


Return to Cub Cadet Forum

Who is online

Users browsing this forum: No registered users and 2 guests