I bought a voltage regulator for my cub 102. the posts are all differently labeled than the original. unfortunatly i wired it up so it wouldnt arch out and it fired up and ran great! but the generator got so hot that it smoked a little. and burned to the touch. the posts lable Top: F middle: Bat Bottom: L. on the back there is another post. i have it ground to the bottom of the regulator. i also have no lights. i have tried everything i can think of! im lost help please
THANKS
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Voltage Regulator 102
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 8
- Joined: Fri May 27, 2011 4:29 pm
- Zip Code: 00000
- Contact:
Voltage Regulator 102
Cub Cadet 102
-
- Team Cub Mentor
- Posts: 20377
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Voltage Regulator 102
E-mail sent, Operator's manual for the 102. Electrical system (includes wiring diagram) is on pages 14 thru 19.
I have an excuse. CRS.
- wdeturck
- 10+ Years
- Posts: 949
- Joined: Mon Dec 08, 2003 6:15 am
- Location: PA Oakmont 15139
Re: Voltage Regulator 102
lafleur94 wrote:I bought a voltage regulator for my cub 102. the posts are all differently labeled than the original. unfortunatly i wired it up so it wouldnt arch out and it fired up and ran great! but the generator got so hot that it smoked a little. and burned to the touch. the posts lable Top: F middle: Bat Bottom: L. on the back there is another post. i have it ground to the bottom of the regulator. i also have no lights. i have tried everything i can think of! im lost help please
THANKS
Sounds like you left the good smoke out of the S/G(the generating coil is shot) and you probably need another VR. The VR that have the L(load or light) are internally hooked to the Batt.
The Geezer from IHregistry.com which crashed and is now Cub Cadet Collectors.
-
- 10+ Years
- Posts: 2338
- Joined: Sat Apr 10, 2004 6:12 pm
- Zip Code: 40218
- Circle of Safety: Y
- Location: KY, Louisville
Re: Voltage Regulator 102
That is not the correct VR, but it will work if it is connected correctly. That post on the back is not a ground, it should go to the armature post on the starter generator, and nothing connected to the "L" terminal. The "F" terminal connects to the starter generator Field post. The "Bat" connects to the solenoid. You have probably fried the starter generator.
-
- 10+ Years
- Posts: 8
- Joined: Fri May 27, 2011 4:29 pm
- Zip Code: 00000
- Contact:
Re: Voltage Regulator 102
all is well guys. i wired it up and turned the key and she fired right up! the battery seems to be charging and the S/G is at a normal running temp. thanks for all your help!
Cub Cadet 102
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: Voltage Regulator 102
These can be a real PIA at times but when its finally right a load has been lifted off or backs. Life is good when the needle goes in the charging area.
I have one that charges when it wants too. Sometimes it charges and sometimes it don't. I will pull the cover and clean the contacts on the VR first. The VR seems lazy. Bill
I have one that charges when it wants too. Sometimes it charges and sometimes it don't. I will pull the cover and clean the contacts on the VR first. The VR seems lazy. Bill
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
Who is online
Users browsing this forum: No registered users and 14 guests