Cub hydraulic pump Parts
Moderator: Team Cub
16 posts
• Page 1 of 2 • 1, 2
Cub hydraulic pump Parts
by Sharkmaster » Fri Jun 10, 2011 12:50 pm
1953 Cub recent purchase. When I got it the touch control pump and lines were removed and both areas blocked off with plates. I have the pump and the lines and am planning on a reinstallation to figure out if it works or leaks or that there was a reason why it was removed. I am starting with the pump that I split in two to make sure that there wasn't any dirt or debris inside. In between the 2 gears on one side of them was a black blob of plastic. I removed it as it looked more like RTV that got into the system and lodged there than a machined part. I see a part called a bearing seal pin. #10 on most parts illustrations from IH. Is this what I removed? Was it really plastic? Do I need it? Can I gt it?
- Sharkmaster
- Posts: 3
- Joined: Fri Jun 10, 2011 12:33 pm
- Zip Code: 06109
Re: Cub hydraulic pump Parts
by ToddW » Fri Jun 10, 2011 1:12 pm
viewtopic.php?f=11&t=44196
Welcome to the forum!
this "How to" covers the parts very well in the rebuild
Sounds like an O ring remains/scrap in there to me
Welcome to the forum!
this "How to" covers the parts very well in the rebuild
Sounds like an O ring remains/scrap in there to me
- ToddW
- 501 Club
- Posts: 2247
- Joined: Tue Sep 02, 2008 3:46 pm
- Zip Code: 54911
- Tractors Owned: -
1951 F-Cub
1960 Yellow Loboy
Despeeder, FH Rototiller, / FH York Rake, FH plow, 152 Disk plow, Woods brush mower, Wagner Loader, Grader Blades, 23-A Disc Harrow. Spike tooth harrow
FORD JUBILEE with Sherman 12-speed
1953 Ford F-100 Jubilee
Cadet 108 with mower and snow thrower -Cadet 1650 with deck and thrower 
- Circle of Safety: Y
Re: Cub hydraulic pump Parts
by Sharkmaster » Fri Jun 10, 2011 1:32 pm
I will look Thanks Great forum
- Sharkmaster
- Posts: 3
- Joined: Fri Jun 10, 2011 12:33 pm
- Zip Code: 06109
Re: Cub hydraulic pump Parts
by ToddW » Fri Jun 10, 2011 1:35 pm
The link I posted should take you right to the topic on the pump rebuild.
Sounds like you are off to a great start in fixing the issue!
Sounds like you are off to a great start in fixing the issue!
- ToddW
- 501 Club
- Posts: 2247
- Joined: Tue Sep 02, 2008 3:46 pm
- Zip Code: 54911
- Tractors Owned: -
1951 F-Cub
1960 Yellow Loboy
Despeeder, FH Rototiller, / FH York Rake, FH plow, 152 Disk plow, Woods brush mower, Wagner Loader, Grader Blades, 23-A Disc Harrow. Spike tooth harrow
FORD JUBILEE with Sherman 12-speed
1953 Ford F-100 Jubilee
Cadet 108 with mower and snow thrower -Cadet 1650 with deck and thrower - Circle of Safety: Y
Re: Cub hydraulic pump Parts
by Sharkmaster » Fri Jun 10, 2011 2:20 pm
It looks like I can rebuild from that great post. I do however see a part as a bearing seal pin. Because it is installed it is hard to make out what it looks like but is a part and mine was damaged. I assume that that seal and gasket kit is available and should include that pin
- Sharkmaster
- Posts: 3
- Joined: Fri Jun 10, 2011 12:33 pm
- Zip Code: 06109
Re: Cub hydraulic pump Parts
by ToddW » Fri Jun 10, 2011 2:25 pm
TM tractor is a site sponsor and have great service and reasonable prices
http://www.tmtractor.com/new/hy/288fp.htm
here is the kit, no key/pin though
maybe Case IH sells the pin, not sure
http://www.tmtractor.com/new/hy/288fp.htm
here is the kit, no key/pin though
maybe Case IH sells the pin, not sure
- ToddW
- 501 Club
- Posts: 2247
- Joined: Tue Sep 02, 2008 3:46 pm
- Zip Code: 54911
- Tractors Owned: -
1951 F-Cub
1960 Yellow Loboy
Despeeder, FH Rototiller, / FH York Rake, FH plow, 152 Disk plow, Woods brush mower, Wagner Loader, Grader Blades, 23-A Disc Harrow. Spike tooth harrow
FORD JUBILEE with Sherman 12-speed
1953 Ford F-100 Jubilee
Cadet 108 with mower and snow thrower -Cadet 1650 with deck and thrower - Circle of Safety: Y
Re: Cub hydraulic pump Parts
by Arthur Luke » Fri Jun 10, 2011 4:53 pm
If you look at TM's picture of the kit, that little black dot towards the bottom is the pin.
Depending on which version of the pump you have, it may not use the bushing seal pin.
Depending on which version of the pump you have, it may not use the bushing seal pin.
Have a good day, Art 
-
Arthur Luke - 501 Club
- Posts: 642
- Joined: Fri May 09, 2008 2:47 pm
- Location: OK, Copan
- Zip Code: 74022
- Tractors Owned: 6 F Cubs, 6 Lo-Boys, 2 # LoBoys, 1 CC, 1 H, 1 other
- Circle of Safety: Y
Re: Cub hydraulic pump Parts
by Don McCombs » Fri Jun 10, 2011 5:41 pm
When new, the seal looks like a miniature hockey puck. Yes, you need it. No, you can't buy it seperately. You'll need to buy the whole pump rebuild kit. Might as well do the whole job while you have it split. 
Don McCombs
MD, Deep Creek Lake
"1950 Something" Farmall Cub, Cub-193 Moldboard Plow
1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower
1948 Farmall Super A, IH 22 Mower
1951 Farmall Super C w/FH
MD, Deep Creek Lake
"1950 Something" Farmall Cub, Cub-193 Moldboard Plow
1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower
1948 Farmall Super A, IH 22 Mower
1951 Farmall Super C w/FH
-
Don McCombs - Cub Pro
- Posts: 9487
- Joined: Mon Feb 03, 2003 6:45 am
- Location: MD, Deep Creek Lake
- Zip Code: 21550
- Tractors Owned: .
"1950 Something" Farmall Cub
1977 IH Cub w/FH
1948 Farmall Super A
1951 Farmall Super C w/FH - Circle of Safety: Y
Re: Cub hydraulic pump Parts
by The Ridge » Wed Dec 05, 2012 3:30 pm
Recently purchased a 1951 Farmall Cub. Need the gear for the hydraulic pump. Any suggestions on finding one?
Dan
Dan
- The Ridge
- Posts: 1
- Joined: Tue Dec 04, 2012 8:00 pm
- Zip Code: 24067
Re: Cub hydraulic pump Parts
by ricky racer » Wed Dec 05, 2012 4:53 pm
Sharkmaster wrote:I will look Thanks Great forum
Best Cub website on the planet!!!!!!
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
-
ricky racer - 501 Club
- Posts: 2037
- Joined: Wed Sep 12, 2007 8:40 pm
- Location: Niles / Buchanan, Michigan
- Zip Code: 49120
Re: Cub hydraulic pump Parts
by Don McCombs » Wed Dec 05, 2012 5:39 pm
Dan,
Your chances of finding just the drive gear are pretty slim. Your best bet will be to look for a reasonably priced used pump. Post a "wanted" ad here and keep an eye out on eBay.
Your chances of finding just the drive gear are pretty slim. Your best bet will be to look for a reasonably priced used pump. Post a "wanted" ad here and keep an eye out on eBay.
Don McCombs
MD, Deep Creek Lake
"1950 Something" Farmall Cub, Cub-193 Moldboard Plow
1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower
1948 Farmall Super A, IH 22 Mower
1951 Farmall Super C w/FH
MD, Deep Creek Lake
"1950 Something" Farmall Cub, Cub-193 Moldboard Plow
1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower
1948 Farmall Super A, IH 22 Mower
1951 Farmall Super C w/FH
-
Don McCombs - Cub Pro
- Posts: 9487
- Joined: Mon Feb 03, 2003 6:45 am
- Location: MD, Deep Creek Lake
- Zip Code: 21550
- Tractors Owned: .
"1950 Something" Farmall Cub
1977 IH Cub w/FH
1948 Farmall Super A
1951 Farmall Super C w/FH - Circle of Safety: Y
Re: Cub hydraulic pump Parts
by Eugene » Wed Dec 05, 2012 6:22 pm
Is it the drive gear off the front of the hydraulic pump? If you need one of the gears inside the pump, then you need to purchase a complete hydraulic pump. In any event, you can advertise in the for sale/wanted section of this site.The Ridge wrote:Recently purchased a 1951 Farmall Cub. Need the gear for the hydraulic pump. Any suggestions on finding one? Dan
I have an excuse. CRS.
- Eugene
- Cub Pro
- Posts: 10914
- Joined: Fri Jul 02, 2004 9:52 pm
- Location: Mo. Linn
- Zip Code: 65051
Re: Cub hydraulic pump Parts
by Alan Riley » Thu Dec 06, 2012 11:39 am
About 10 years ago I priced just the drive gear at my local Case-IH dealership. I seem to recall them wanting around $135 for one back then. 
Old Age: The phase of life when nothing works and everything hurts...
- Alan Riley
- Cub Star!!
- Posts: 412
- Joined: Wed Feb 05, 2003 11:49 pm
- Location: LA, Deville
- Zip Code: 71328
Re: Cub hydraulic pump Parts
by Hengy » Thu Dec 06, 2012 1:22 pm
Did your gear get all chewed up or is it missing (as in came off the shaft)...
Mike in Gibsonia, PA
-
Hengy - Cub Pro
- Posts: 6612
- Joined: Sat Feb 18, 2006 8:12 pm
- Location: PA, Gibsonia
- Zip Code: 15044
- eBay ID: lacrosseorgans
- Skype Name: Mike.Hengelsberg
- Tractors Owned: 1949 Cub "Merlin"
1955 Cub "Lewis"
Cub Trailer
A-60 Blade
Cub-22 Mower
193 Plow - Circle of Safety: Y
Re: Cub hydraulic pump Parts
by Denny Clayton » Thu Dec 06, 2012 4:50 pm
The Ridge wrote:Recently purchased a 1951 Farmall Cub. Need the gear for the hydraulic pump. Any suggestions on finding one?
Dan
Have you looked in the oil pan?
'61 Lo-Boy
'60 FH Lo-Boy
'60 Lo-Boy
'57 FH Cub "Rusty"
'56 FH Cub
(2) '48 Cubs
'75 IH 140 w/1000 loader
C-3 mower, FH Woods 42F, 22 sickle (2), 54A blade, L-54 blade, 194 plow, FH L-38 disk, FH LB disk, 144 cultivators, FH platform carrier
'60 FH Lo-Boy
'60 Lo-Boy
'57 FH Cub "Rusty"
'56 FH Cub
(2) '48 Cubs
'75 IH 140 w/1000 loader
C-3 mower, FH Woods 42F, 22 sickle (2), 54A blade, L-54 blade, 194 plow, FH L-38 disk, FH LB disk, 144 cultivators, FH platform carrier
-
Denny Clayton - 501 Club
- Posts: 3209
- Joined: Wed Feb 05, 2003 1:18 pm
- Location: OH, Sidney
- Zip Code: 45365
- Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.
- Circle of Safety: Y
16 posts
• Page 1 of 2 • 1, 2
Who is online
Users browsing this forum: Arthur Luke, Brandon Webb, equeen, Garvin Gatewood, tenn terry t and 10 guests
|
|