This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

PTO Clutch Pack Diagram?

IH CUB Lo-Boy Series - 154, 184, 185 Forum -- Questions and answers to all of your Lo-Boy related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
saluki
10+ Years
10+ Years
Posts: 3
Joined: Fri Jun 03, 2011 9:37 am
Zip Code: 62902

PTO Clutch Pack Diagram?

Postby saluki » Mon Jun 06, 2011 2:31 pm

I have a 185 and I cannot remember how the hardware holds the PTO Clutch Pack & Shaft on the tractor. Does anyone have a diagram to show me how to mount this?

Also looking for Shims in the PTO Clutches. Possibly 4-5 Total?

The gentleman that is repairing says the shims are out of tolerance, if I could find one that is 51thousandths that the clutches would be in tolerance, or I would need 4 or 5 originals, not sure what is in there. Or Shim Stock with 1 3/8 center diameter he said he could make it.

Also if anyone has a diagram of the clutches.

SPONSOR AD

Sponsor



Sponsor
 

seahaul
10+ Years
10+ Years
Posts: 179
Joined: Wed Dec 23, 2009 1:04 pm
Zip Code: 28538
Tractors Owned: LoBoy 185 with Woods mower
LoBoy 184 with Woods mower and 3-pt
LoBoy 184 with RM59-LB mower
Circle of Safety: Y

Re: PTO Clutch Pack Diagram?

Postby seahaul » Mon Jun 06, 2011 7:45 pm

Click on the Manuals tab above, then go to "Number Series Cubs", then to "Cub 154 LoBoy", then to "TC-131 Parts Catalog", and look at Page 11.
(The PTO for a 185 is the same as for a 154; the parts catalog is only listed under the 154 tab). The shaft is mounted on two bearings, one near the front where the belts are and the other between the clutch pack and the mower pulley.
Hope this helps.
Charlie

User avatar
SONNY
10+ Years
10+ Years
Posts: 4087
Joined: Thu Nov 09, 2006 11:26 pm
Zip Code: 61722

Re: PTO Clutch Pack Diagram?

Postby SONNY » Mon Jun 06, 2011 10:51 pm

Try Hamilton Bob for shims!---all IH will sell is the complete pack at $260.00, and you will also nee snaprings not included in the parts pack.---went thru mine last year and still fighting it to get the adjustment right so it will work,---its either too tight or too loose, cant get the right combo in there.---right now the belts are slipping, when I get them tight the clutch slips,--- so there is no middle ground!!! I gave up on it this spring and use the Dixon bagger!---much better mower, less problems and faster mower! thanks; sonny

Landreo
10+ Years
10+ Years
Posts: 1172
Joined: Tue Oct 19, 2004 7:10 am
Zip Code: 29130
Tractors Owned: fcub(5)
tricycle cub
154 (4)
Earthmaster (2)
JD 40T, JD 420 crawler-loader, JD MT
JD Unstyled A, Styled A, Unstyled AR
JD H
Centaur Tractor
AC Model C, G
Cub Cadets (9)
Gibson D
Red-E
Circle of Safety: Y
Location: SC, Ridgeway

Re: PTO Clutch Pack Diagram?

Postby Landreo » Tue Jun 07, 2011 10:13 am

Try here for photos:
http://www.farmallcub.com/phpBB2/viewtopic.php?f=31&t=60650

Shim washers are also available from McMaster Carr. Do not use brass shim stock. If you need photos of the clutch position and mounts on the tractor then I can posts some photos.

saluki
10+ Years
10+ Years
Posts: 3
Joined: Fri Jun 03, 2011 9:37 am
Zip Code: 62902

thank you - Re: PTO Clutch Pack Diagram?

Postby saluki » Tue Jun 07, 2011 11:42 am

THANK YOU seahaul, Sonny & Landreo!

Landreo, if you could post the additional pictures we would really appreciate your time and trouble. THANK YOU!

HAMILTONBOB
10+ Years
10+ Years
Posts: 75
Joined: Tue Jun 26, 2007 6:08 am

Re: PTO Clutch Pack Diagram?

Postby HAMILTONBOB » Thu Jun 09, 2011 7:58 am

Sonny,
If you are having a problem adjusting your PTO, chances are the plates between your friction plates are warped. Check to see they are perfectly flat when you lay each on a PTO flywheel. Make sure to turn over and check both sides. If they are warped from getting too hot, you not be able to adjust the Pto so it is fully engaged then fully disengaged. It will adjust too loose or too tight. Adjust until you hit 85Lbs.
Good Luck
Bob
Hamiltonbobscubs

Landreo
10+ Years
10+ Years
Posts: 1172
Joined: Tue Oct 19, 2004 7:10 am
Zip Code: 29130
Tractors Owned: fcub(5)
tricycle cub
154 (4)
Earthmaster (2)
JD 40T, JD 420 crawler-loader, JD MT
JD Unstyled A, Styled A, Unstyled AR
JD H
Centaur Tractor
AC Model C, G
Cub Cadets (9)
Gibson D
Red-E
Circle of Safety: Y
Location: SC, Ridgeway

Re: PTO Clutch Pack Diagram?

Postby Landreo » Mon Jun 13, 2011 9:06 am

I tried to post some more photos but I am over the 1 meg limit. I can send some to your email address if you still need them.

saluki
10+ Years
10+ Years
Posts: 3
Joined: Fri Jun 03, 2011 9:37 am
Zip Code: 62902

Re: PTO Clutch Pack Diagram?

Postby saluki » Mon Jun 13, 2011 9:45 am

If you could please email saluki97@hotmail.com THANK YOU


Return to “Lo-Boy Series - 154, 184, 185”

Who is online

Users browsing this forum: No registered users and 4 guests