Have you ever seen a grown man cry?

Farmall Super A, AV, 1939 - 1954

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Re: Have you ever seen a grown man cry?

Postby Dale Finch » Wed Jun 22, 2011 7:56 am

Hey Pabst, if you are missing working on your SA, come on down...I am in the "now how did this go together?" phase!!! :lol:

Just hope I took enough photos!

Dale F
Dale Finch
User avatar
Dale Finch
501 Club
501 Club
 
Posts: 1381
Joined: Tue Apr 27, 2010 11:34 am
Location: NC, Chapel Hill
Zip Code: 27517
Tractors Owned: '52 Cub "Bobbie"
'55 Cub "Bertha"
'55 Cub "Ben"
'48 Super A "Bubba"
Circle of Safety Award
Circle of Safety: Y

Re: Have you ever seen a grown man cry?

Postby Pabst » Wed Jun 22, 2011 9:14 am

Gee Whiz DaleF,
With my teardown, I photo areas that I knew were going to be tricky for me to reassemble. And I used photos and commentary posted on this site from Artc, BDFinch and others. My father-n-law though I was nuts doing photo sessions! It is together and running great! I did not complete the same as you, sandblasted prior to overhauling. I completed my first cub the 56 in the same fashion. But, the person that did the painting did not do a stellar performance. Although, I purchased good paint it shines like the dickens!
Pabst :D
Pabst
Cub Star!!
Cub Star!!
 
Posts: 471
Joined: Sat Dec 25, 2010 6:31 am
Location: Cleveland
Zip Code: 44131
Tractors Owned: Farmall cub 50
Farmall cub 52-Krakus
Farmall cub 56-Spartacus
Farmall super A 49
Cub L-F 194 Plow
Cub F38 Disk Harrow
Cub L-F1 Platform Carrier
Cub 54 Leveling Blade
Circle of Safety Award
Circle of Safety: Y

Re: Have you ever seen a grown man cry?

Postby Rudi » Wed Jun 22, 2011 8:37 pm

You don't need a loader to dead end a Touch Control system. Ask me.. I did it not once, not twice, not even three times but count em -- 4 times :!: For me I learned that once you install the by-pass block you best have a jumper to ensure you have a complete circuit. Even though I learned this rather quickly, I did not appreciate some of the ideas that were expressed in the How Not To Do Hydraulics thread. Had I understood hydraulics a little better then, I would not have dead headed the system 3 more times. I would have known to install a Pressure Relief Valve after the valves and before the return to the reservoir. I finally learned this while I was finishing up my Building a Cub Mounted Wood Splitter - Part 4.

Bob, do you have a Pressure Relief Valve with that 1000 loader? Since the IH 1000 Loader Owner's Manual states that the by-pass block must be removed if the loader is removed, then I would think that they system does not have a built in Pressure Relief Valve. I would add one... :roll: :idea: :)
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship

User avatar
Rudi
Team Cub
Team Cub
 
Posts: 28467
Joined: Sun Feb 02, 2003 8:37 pm
Location: NB Dieppe, Canada
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC
Circle of Safety Award
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM

Re: Have you ever seen a grown man cry?

Postby spaceghost » Wed Jun 22, 2011 9:29 pm

Rudi wrote:Bob, do you have a Pressure Relief Valve with that 1000 loader? Since the IH 1000 Loader Owner's Manual states that the by-pass block must be removed if the loader is removed, then I would think that they system does not have a built in Pressure Relief Valve. I would add one... :roll: :idea: :)


I don't but I don't want to have that problem again so I will go over all the data before the by pass block goes on.
Good judgment comes from experience, and experience comes from poor judgment.

1959 LO-Boy 1950 Super A
User avatar
spaceghost
10+ Years
10+ Years
 
Posts: 735
Joined: Wed Jun 23, 2004 8:19 am
Location: Middleboro MA usa
Zip Code: 02346
Tractors Owned: 1959 Cub lo-boy
1950 super A

Re: Have you ever seen a grown man cry?

Postby Jim Becker » Wed Jun 22, 2011 10:25 pm

Rudi wrote:I would have known to install a Pressure Relief Valve after the valves and before the return to the reservoir.

Bob, do you have a Pressure Relief Valve with that 1000 loader?


The pressure relief valve has to go between the bypass block and the valves. It won't do any good after the valves.

A pressure relief is built into the valves of the 1000 loader. If you remove the loader, you are removing the pressure relief.
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11920
Joined: Sun Feb 02, 2003 3:14 pm
Location: MN
Zip Code: 75048
Circle of Safety Award
Circle of Safety: Y

Re: Have you ever seen a grown man cry?

Postby Rudi » Thu Jun 23, 2011 10:00 pm

I linked to the wrong post.. should have been Part 3.

Image

And yup, Jim is correct, the Pressure Relief Valve is built into the valve. Neat :D

I found it on page 13 of the LDR-1 Rev 5-3-68. It isn't on the server yet.. I can email it you need it Bob. It may also be on the PDF set as well.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship

User avatar
Rudi
Team Cub
Team Cub
 
Posts: 28467
Joined: Sun Feb 02, 2003 8:37 pm
Location: NB Dieppe, Canada
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC
Circle of Safety Award
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM

Re: Have you ever seen a grown man cry?

Postby dennisbushnell » Sat Jul 02, 2011 2:03 pm

Old timers trick, spring clothes pins on the lifter to hold them up
You meet the nicest people on a cub
dennisbushnell
5+ Years
5+ Years
 
Posts: 426
Joined: Fri May 08, 2009 7:04 pm
Location: Roodhouse il
Zip Code: 62082
Tractors Owned: two 47 two 48 53 and a 72 another 53

Previous

Return to Farmall A, Super A, AV

Who is online

Users browsing this forum: No registered users and 2 guests