Sun Jun 26, 2011 11:15 am
I am looking for a lead on either a food grade paint or coating for my fruit press.The bottom plate has a light rust on it that I don't think would help the taste of any pressed juice. I have googled it and tried to find something appropriate and have came up with a big 0 so far any help out there?
Sun Jun 26, 2011 11:55 am
I would coat it with oil between uses and power wash to remove the oil when I use it.
Sun Jun 26, 2011 12:06 pm
From a wood-turners perspective:
avoid vegetable and nut oils
these will go rancid after a while. Beside the General Products Salad bowl finish, which is a good choice, light mineral oil will also work, as it does not impart a taste and is not a problem for people with sensitivities to nut oils.
Sun Jun 26, 2011 7:58 pm
Mineral oil is what I use on wood cutting boards.
2 coats on a new board and a single coat annually.
Mon Jun 27, 2011 12:57 pm
Thanks fella's I think I might have a clue.
Thu Jul 28, 2011 6:42 am
I worked at Krispy Kreme Doughnuts in college and we used mineral oil for everything in our extruding machines.
Thu Aug 04, 2011 8:22 pm
Try this link, maybe it will help food grade polyurethane for apple cider presses.http://www.homesteadharvest.com/ezpopi.html
Sun Aug 07, 2011 9:45 pm
Hot Diggety that is exactly what I have been looking for, thanks Early Cub
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.