hope to post pics as soon i can figure how to do it.. now i am going thru the parts to see what goes with what and what all is missing. I bet she could tell some stories...cuz she sure wasn't a trailer queen. I look forward to share pics with you allhello everyone!!
Moderator: Team Cub
9 posts
• Page 1 of 1
hello everyone!!
by rogerk » Tue Aug 09, 2011 12:23 pm
recently bought my first cub..... 1951 came with some toys too. she did not run but after I got her home and cleaned out the fuel tank the lines and carb she fired right up!! hope to post pics as soon i can figure how to do it.. now i am going thru the parts to see what goes with what and what all is missing. I bet she could tell some stories...cuz she sure wasn't a trailer queen. I look forward to share pics with you all
hope to post pics as soon i can figure how to do it.. now i am going thru the parts to see what goes with what and what all is missing. I bet she could tell some stories...cuz she sure wasn't a trailer queen. I look forward to share pics with you all- rogerk
- Posts: 44
- Joined: Tue Aug 09, 2011 11:59 am
- Location: king, north carolina
- Zip Code: 27021
- Tractors Owned: 1951 cub
- Circle of Safety: Y
Re: hello everyone!!
by Jimdawg » Tue Aug 09, 2011 1:26 pm
Congrats on buying your first cub and welcome to the forum!
It is good idea to give the cub new fluids and and a simple tune up.
~ Jim
It is good idea to give the cub new fluids and and a simple tune up.
~ Jim
-
Jimdawg - 501 Club
- Posts: 626
- Joined: Tue May 01, 2007 4:05 pm
- Location: MA, Dartmouth
- Zip Code: 02748
Re: hello everyone!!
by ScottyD'sdad » Tue Aug 09, 2011 1:59 pm
Jimdawg wrote:Congrats on buying your first cub and welcome to the forum!
It is good idea to give the cub new fluids and and a simple tune up.
~ Jim
Welcome! I agree with Jim regarding the fluid changes. Ed
50 ,52,53,56,59 F Cubs, 55,55,57,63,63 fast hitch, 64 lo-boys, 71 154, 184 lo-boy,61 cadet original. IH spreader,IH corn grinder, Oli. OC3 ,AC D10 ,IH 444 , Potato digger, wagner ldr 3 power units.
- ScottyD'sdad
- Cub Pro
- Posts: 4608
- Joined: Thu Aug 31, 2006 7:00 pm
- Location: Ma. Rehoboth
- Zip Code: 02769
- Circle of Safety: Y
Re: hello everyone!!
by rogerk » Tue Aug 09, 2011 4:03 pm
I think I have figured out how to do pics..........
...........
............
.......................Last edited by rogerk on Sat Aug 20, 2011 3:03 pm, edited 7 times in total.
- rogerk
- Posts: 44
- Joined: Tue Aug 09, 2011 11:59 am
- Location: king, north carolina
- Zip Code: 27021
- Tractors Owned: 1951 cub
- Circle of Safety: Y
Re: hello everyone!!
by Jimdawg » Tue Aug 09, 2011 4:56 pm
This should help:
Any implements come with the cub?
~ Jim
Any implements come with the cub?
~ Jim
-
Jimdawg - 501 Club
- Posts: 626
- Joined: Tue May 01, 2007 4:05 pm
- Location: MA, Dartmouth
- Zip Code: 02748
Re: hello everyone!!
by Mike in Louisiana » Wed Aug 10, 2011 7:17 am
Hello Roger and WELCOME to the forum
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
-
Mike in Louisiana - 501 Club
- Posts: 3675
- Joined: Tue Feb 15, 2005 10:10 am
- Location: LA, Doyline
- Zip Code: 71023
- Circle of Safety: Y
Re: hello everyone!!
by Chris Todd » Wed Aug 10, 2011 7:52 am
Hello Roger! Good place to be. One thing comes to mind, Cubs will loose oil prime after sitting for awhile and need reprimed. Make sure you have oil pressure 
Chris Todd
55 Cub (Red), 47 Cub #2752 (Roosevelt), 61 CCO
55 Cub (Red), 47 Cub #2752 (Roosevelt), 61 CCO
-
Chris Todd - 501 Club
- Posts: 713
- Joined: Sun Feb 02, 2003 8:15 pm
- Location: OH, Zanesville
- Zip Code: 43701
- Tractors Owned: 1955 Farmall Cub
1947 Farmall Circle Cub
1973 Int. 474
Re: hello everyone!!
by Tezell » Wed Aug 10, 2011 1:23 pm
Welcome to the forum Rodger.
"I ain't believing this!"
-
Tezell - 501 Club
- Posts: 1769
- Joined: Fri Sep 10, 2010 5:23 pm
- Location: Jakin Georgia
- Zip Code: 39861
- Tractors Owned: "Louie" 64 Cub Fast Hitch
"Dale" 53 Cub Fast Hitch
"Paw Paw"71 Cub Fast
Hitch
"Ugly" 75 Cub
"Jacksonville" 53 Cub
03 John Deere 5320 - Circle of Safety: Y
Re: hello everyone!!
by Rudi » Thu Aug 11, 2011 10:28 am
Roger:
G'day and congrats
on acquiring your very first new to you Cub 
It probably won't be your last as these things are addictive. Ask any member of the MCC 
Follow the links below to some great information including how to post pics.. which you can find in the CBoK
G'day and congrats
on acquiring your very first new to you Cub It probably won't be your last as these things are addictive. Ask any member of the MCC Follow the links below to some great information including how to post pics.. which you can find in the CBoK
to the Farmallcub.com
Forum Family. And you have come to the right place for all things Cub related. If you click on the Site Rules, Regulations, & Important Information, it will point you to
the Welcome Wagon wherein you will find links to many useful sites and topics. One of which is the Cub Manual Server. You may also wish to check out the CubFests and Gatherings Calendar 2011 to find a gathering of fellow members where Cubs, Friends and a good time is shared by all. Enjoy!.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
"Before beginning a hunt, it is wise to ask someone what you are looking for before you begin looking for it." - Winnie
Cub Manual Server
"Before beginning a hunt, it is wise to ask someone what you are looking for before you begin looking for it." - Winnie
Cub Manual Server
-
Rudi - Team Cub
- Posts: 27192
- Joined: Sun Feb 02, 2003 8:37 pm
- Location: NB Dieppe, Canada
- Zip Code: E1A7J3
- eBay ID: ve9rhs
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC - Circle of Safety: Y
9 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest
|
|