Snapper Rear Engine Rider - NEWBIE NEED HELP

All non-Cub/Cadet/IH/Farmall/Case tractor and machinery discussions.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Re: Snapper Rear Engine Rider - NEWBIE NEED HELP

Postby klyant » Thu Aug 18, 2011 5:58 pm

klyant wrote:Dad was a snapper dealer for many years. The model number tells me it is a 30 inch deck 8 hp and was made in 83.


i was in a hurry earlier.

The model number works like this,
the first two digits (30) are the deck size 30 inch
The next two digits (08) is HP which is 8
The last digit (3) is the year. You have to know a little about Snappers to tell if it's 73,83,or 93.

When you order parts you need the series number. That is the last two digits of the seial number. Snapper only changed the series number when they made a parts change. In about 1990 Snapper started making so many changes they had to add a letter to the series number in indicate early, or late series.

When dad quit selling Snappers, they were up to series 21D. Made it impossible to stcok parts they changed way too often.
klyant
5+ Years
5+ Years
 
Posts: 72
Joined: Sun Dec 30, 2007 7:55 pm
Location: nebraska

Re: Snapper Rear Engine Rider - NEWBIE NEED HELP

Postby klyant » Thu Aug 18, 2011 6:07 pm

I'm sure that the original motor. replacement engines were 99% of the time painted Black. They were good mowers. 8hp is a little small for the 30 inch deck. I still have seven used ones left over from dad. Most are 28 inch. I have one 32 and a few 30's.

Some parts are hard to find for the old flat heads. The EPA wants to get rid of all those old motors.
klyant
5+ Years
5+ Years
 
Posts: 72
Joined: Sun Dec 30, 2007 7:55 pm
Location: nebraska

Previous

Return to Other Tractors and Machinery

Who is online

Users browsing this forum: Scrivet and 2 guests