Super A Rear Engine Seal (felt)

Farmall Super A, AV, 100, 130, & 140 1939 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
Dale Finch
5+ Years
5+ Years
Posts: 2187
Joined: Tue Apr 27, 2010 11:34 am
Zip Code: 27517
Tractors Owned: '55 Cub "Bertha"
'55 Cub "Ben"
'55 Cub "Bailey"
'56 Cub "Boris"
'48 Super A "Bubba"
Circle of Safety: Y
Location: NC, Chapel Hill

Super A Rear Engine Seal (felt)

Postby Dale Finch » Thu Sep 22, 2011 7:15 pm

I was just communicating with MBergthold who informed me of a potential problem I may have. :( He had recently read an article about the necessity of soaking a new rear felt oil seal (part #4 http://www.cleancomputes.com/Cub/Super%20A%20-%20Super%20AV/TC-39B%20Parts%20Catalog/Page%2061.jpg) with oil to preclude glazing the felt and possibly causing a leak. Well....I recently replaced mine, and did not do this. Is there ANY way to oil this felt now that the tractor is almost completely reassembled? The oil pan is off...can I spray/squirt oil up to the rear seal that way? Or can I reinstall the oil pan, OVER fill the engine with oil so it reaches the height of that rear seal and soak it for a day or so, then drain back down to normal "full"?

I REALLY do NOT want to split the tractor now that it has been painted, and everything is almost finished! Any suggestions would be appreciated.
Last edited by Dale Finch on Thu Sep 22, 2011 8:04 pm, edited 1 time in total.

User avatar
Bigdog
Cub Pro
Cub Pro
Posts: 24066
Joined: Sun Feb 02, 2003 12:50 pm
Zip Code: 43113
Circle of Safety: Y
Location: OH, Circleville

Re: Super A Rear Engine Seal (felt)

Postby Bigdog » Thu Sep 22, 2011 7:19 pm

Dale - I think over-filling it will work.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

Image

http://www.cubtug.com

User avatar
Dale Finch
5+ Years
5+ Years
Posts: 2187
Joined: Tue Apr 27, 2010 11:34 am
Zip Code: 27517
Tractors Owned: '55 Cub "Bertha"
'55 Cub "Ben"
'55 Cub "Bailey"
'56 Cub "Boris"
'48 Super A "Bubba"
Circle of Safety: Y
Location: NC, Chapel Hill

Re: Super A Rear Engine Seal (felt)

Postby Dale Finch » Thu Sep 22, 2011 7:58 pm

Hey, it's worth a try, right?...a few gallons (any guess how much??) of oil that maybe does the job...cheap and easy!! In any case, I might as well wait to split the tractor to see if the seal even starts leaking!

Bob McCarty
Team Cub Mentor
Team Cub Mentor
Posts: 7586
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: Super A Rear Engine Seal (felt)

Postby Bob McCarty » Thu Sep 22, 2011 9:22 pm

Dale, Hoist the front end up so the tractor is vertical. Then you'll only need about a couple cups of oil to cover the seal. :D

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein

User avatar
Dale Finch
5+ Years
5+ Years
Posts: 2187
Joined: Tue Apr 27, 2010 11:34 am
Zip Code: 27517
Tractors Owned: '55 Cub "Bertha"
'55 Cub "Ben"
'55 Cub "Bailey"
'56 Cub "Boris"
'48 Super A "Bubba"
Circle of Safety: Y
Location: NC, Chapel Hill

Re: Super A Rear Engine Seal (felt)

Postby Dale Finch » Thu Sep 22, 2011 9:35 pm

:big smile: :big smile: :big smile: :big smile: :big smile: :big smile: :big smile: :big smile:
Oh, Bob, that really made me laugh out loud!!!! Good one!

User avatar
Dale Finch
5+ Years
5+ Years
Posts: 2187
Joined: Tue Apr 27, 2010 11:34 am
Zip Code: 27517
Tractors Owned: '55 Cub "Bertha"
'55 Cub "Ben"
'55 Cub "Bailey"
'56 Cub "Boris"
'48 Super A "Bubba"
Circle of Safety: Y
Location: NC, Chapel Hill

Re: Super A Rear Engine Seal (felt)

Postby Dale Finch » Thu Sep 22, 2011 9:36 pm

I read your post again and am STILL laughing!


Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: No registered users and 1 guest