Sun Oct 16, 2011 9:29 am
Don, tell us about your new building. I hope to put something of my own up before too long and am looking for ideas...
Sun Oct 16, 2011 10:32 am
I have barn envy now.
What size is it?
Sun Oct 16, 2011 10:54 am
Nice Don! Both the line-up and the barn! Could there be a Western Maryland Cubfest in the near future?
Sun Oct 16, 2011 5:48 pm
For those with questions, the building is 30' X 60', with a 15' X 60' lean-to across the back. Although I have no immediate plans to heat the building, it has 1/2 inch foil faced rigid foam in the walls and roof to prevent condensation on the inside surfaces. The concrete floor has a moisture barrier and two floor drains. One in each bay. Two 3 inch conduit sweeps were installed prior to the concrete going in. The photos were taken before the concrete floor and four foot apron, the full length of the front, were installed. I did not do the building or the concrete work myself. The building cost approximately $18,000 and the concrete floor was $6,000. The next phase will be to bring power into the building. Next spring if my chief financal officer approves.
I can take more photos if someone wants them.
Sun Oct 16, 2011 5:59 pm
Your "lineup" looks great! Your "stable" is as good as it gets. Enjoy.
Sun Oct 16, 2011 6:52 pm
Sun Oct 16, 2011 7:00 pm
Both the lineup and the building look good! Congratulations.
Sun Oct 16, 2011 8:36 pm
That's my shop!! That is about the size I have in mind. How tall are your doors? Did you get someone local to do it for you?
Mon Oct 17, 2011 8:21 am
The new building looks great, Don! I often wish I could level my old shop building & start over, it would look a lot like yours. My present shop is a 2500 Sq. Ft. chicken house that was here long before me. It's served me well, but isn't very pretty.
Tue Oct 18, 2011 6:46 pm
The doors are 12 wide by 10 tall.
Tue Oct 18, 2011 8:27 pm
Nice lineup and stable looks great! Pabst
Tue Oct 18, 2011 10:29 pm
Looks good Don
Wed Oct 19, 2011 7:32 pm
I see Don has had his new building for a while, and keeping it from us.
Look at the date stamp on this post.
Re: SMV on a deluxe seat, FH Lo Boy
by Don McCombs » Thu Jan 06, 2011 6:22 pm
I guess you had to have the concrete floor done before the big reveal Don.
Wed Oct 19, 2011 8:35 pm
Actually, I thought I had posted about the building back when it was finished. But, maybe I'm just imagining things.
Wed Oct 19, 2011 8:58 pm
Don McCombs wrote:
Actually, I thought I had posted about the building back when it was finished. But, maybe I'm just imagining things
I am gonna try it...imagining that same building on my property...I'll let ya'all know how it works !
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.