stump grinder

All non-Cub/Cadet/IH/Farmall/Case tractor and machinery discussions.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
Posts: 23080
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

stump grinder

Postby John *.?-!.* cub owner » Tue Oct 25, 2011 4:26 pm

A neighbor has some ground that was logged off before he bought it and has been having the stumps cleared a little at a time so he can level it and seed it in pasture. The guy that has been digging out the stumps did not have a big enough rig to do the job, so he has been digging around a lot without getting much done. Chris decided to hire a retired man who has a stump grinder to do take them down to about 6 inches below ground level. I have seen some stump grinders in use, but never anything quite like this.


It is powered by what appears to be a 6 cylinder Ford engine, and has a gear drive to a heavy chain to turn the saw. Saw is about 3 1/2 feet or a little bigger with carbide teeth similar to those on a backhoe bucket for digging limestone. The operator has controls that allow raising and lowering of the blade, as well as throttle and clutch. In addition the rig has a hydraulically telescoping tongue that has a travel of about 6 to 8 feet, and the tongue pivots just in front of the axle, also controlled by a set of hydraulic cylinders.


The rig is backed up to a stump and he lets the blade down and starts swinging it side to side, extending the tongue as he does. Takes roughly 3 or 4 minutes to do a 24 inch stump. My first thoughts were that it would be a lot handier if he had a hitch on the front of the truck, but as I watched his wife backing it from stump to stump I was truly impressed with how well she was backing the rig, even after I realized he was guiding her by steering the grinder with the hydraulics and she was just following along with the truck. Watching how well they worked together it was obvious thay have been doing this quite a while.
If you are not part of the solution,
you are part of the problem!!!

User avatar
5+ Years
5+ Years
Posts: 480
Joined: Wed Jul 28, 2010 12:53 pm
Zip Code: 18801
eBay ID: ranger_jer
Tractors Owned: Oliver 70 x3
Oliver 77 "Beulah"
Oliver 88
Farmall Cub "Allie"
IH Cub "Yellow Dobbin"
Farmall A "unnamed"
Cub Cadet 100 "Rhonda"
Circle of Safety: Y
Location: PA, Birchardville (Susquehanna County)

Re: stump grinder

Postby OliverFarmall » Wed Oct 26, 2011 9:06 am

That should do a great job !
I'd love to be able to borrow that for a day or two.
22 sickle bar mower x2
23A tandem disc harrow
144 cultivator (#53 & #97 spring tooth)
154 leveling and grader blade
189 moldboard plow 2-way
193 moldboard plow x2
252 cultivator

spring tooth harrows
David Bradley planter (modded for Cub)

User avatar
10+ Years
10+ Years
Posts: 7703
Joined: Thu Aug 19, 2004 2:31 pm
Zip Code: 10314
Location: NY Staten Island & Franklin

Re: stump grinder

Postby beaconlight » Wed Oct 26, 2011 2:04 pm

John the grinder with all it's capability is the real deal. The two husband and wife make a good team.

"Life's tough.It's even tougher if you're stupid."
- John Wayne

" We hang petty thieves and appoint the great ones to public office."
- Aesop

Return to “Other Tractors and Machinery”

Who is online

Users browsing this forum: No registered users and 2 guests