Box Grader, Ripper

All non-Cub/Cadet/IH/Farmall/Case tractor and machinery discussions.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Team Cub Mentor
Team Cub Mentor
Posts: 16802
Joined: Fri Jul 02, 2004 9:52 pm
Zip Code: 65051
Circle of Safety: Y
Location: Mo. Linn

Box Grader, Ripper

Postby Eugene » Sat Oct 29, 2011 11:11 am

Link below. This is on the Garden Tractor web site. ... made-9473/
I have an excuse. CRS.

10+ Years
10+ Years
Posts: 3004
Joined: Thu Nov 09, 2006 11:26 pm
Zip Code: 61722

Re: Box Grader, Ripper

Postby SONNY » Sat Oct 29, 2011 10:50 pm

That is some nice stuff on there!!!! thanks; sonny

10+ Years
10+ Years
Posts: 6343
Joined: Sat Jul 22, 2006 5:02 pm
Zip Code: 00000
Location: in northern usa

Re: Box Grader, Ripper

Postby BigBill » Mon Nov 07, 2011 12:13 pm

Nice stuff there. I made my own ripper using the single tooth ripper from TSC i made the 3pt hitch to fit my int154 cub. I been doing test drainage trenches with it to see were they could be best used with curtain drains and drain pipes. One single trench stopped the water completely so these little tools work great.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.

'Country' Elliott
Cub Pro
Cub Pro
Posts: 2575
Joined: Mon Feb 03, 2003 5:25 am
Zip Code: 37774
Tractors Owned: 1948 McCormick-Deering Farmall Cub
152 Disc Plow & Flat Belt Pulley
1971 Cub Cadet Model 73
Brinly Cultivator
Brinly #8 Moldboard Plow
1971 JD 112 Garden Tractor
1928 Economy Hit & Miss Engine
1927 David Bradley "Little Wonder" Feed Grinder
3 A.H. Patch Corn Shellers
1 A.H. Patch #1 Grist Mill
Circle of Safety: Y
Location: TN, Loudon (near Knoxville)

Re: Box Grader, Ripper

Postby 'Country' Elliott » Mon Feb 06, 2012 6:44 am

Here are photos of my Gannon Earthcavator (originally found with Sears 3-point hitch). I converted it to fit a sleeve hitch and restored it to fit my JD 140 H3. Gannon Earthcavators have the ripper teeth, and when the vertical lever is pulled forward, the implement can be used as a ripper (with the teeth straight down) or back blade grader (pushed in reverse, as shown in the bottom photo), or as a front blade grader (pulled forward as shown in the upper photo). These are very rare to come across, and restored will sell for about $500.00 ...'Country'


"Save The Possums...Collect The Whole Set"
"Tennessee Sun-Dried Possum...Heaven In A Can"

  • Similar Topics
    Last post

Return to “Other Tractors and Machinery”

Who is online

Users browsing this forum: No registered users and 2 guests