Post your introduction and "get to know me" information in this forum.
Moderator: Team Cub
12 posts • Page 1 of 1
New member as of 11-4-11 I have 2 cubs and several pieces of equiptment. I have one post looking for the front lifting rod for a blade and one to try to find the length. I was told it was a early 54 blade but from pictures it looks like a McCormick Deering Leveling and Grader Blade.Can anyone help me with the length of this rod or tell me where I might find one? Thank You
1948 Farmall Cub 1951 Farmall Cub 1957 Farmall Cub1958 230 Farmall 1957 350 Farmall 1986 White FB16
Ray, Welcome to the Forum. You'll find a lot of friendly and knowledgeable Cub lovers here. As to your questions about the 54 blade, Rudi put a link in his reply in your other post. If you click on it, it will take you to a rather long thread, but near the bottom of the first page, Bigdog has two pictures with dimensions. If you don't want to make your own, I would suggest putting a post in the "Wanted" Forum, as members with stuff to sell might see it better there. I hope that helps.
Edit: Here is a link to TM Tractor's page, it looks like they carry what you need but have it on backorder: http://www.tmtractor.com/new/gb/gb_001.htm
"We don't need to think more,
we need to think differently."
Hi Ray, welcome to the forum!
I don't believe in taking the bull by the horns. I took a goat by the horns once and that was enough excitement for me.
Barnyard Bash CubFest May 31 - June 1, 2013
Click here for info.
Welcome to the Forum!
"I ain't believing this!"
Glad to see another from Missouri. I'm about an hour away, here in California.
Ron in Mid Missouri
Welcome aboard. Make sure yuo make it to a cub fest near you. Theres one here in april, click on my signature line, and there is one Kansas the other way. So you are located near a couple.
G'day and congrats on not only becoming Cub owner but becoming a member of the MCC! to boot
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
"Before beginning a hunt, it is wise to ask someone what you are looking for before you begin looking for it." - Winnie
Cub Manual Server
Welcome to the forum! Always good to see another Missouri Cubber join the ranks.
1. Welcome to the Forum
2. Welcome to the MCC
3. Welcome to the SEC
If you're gonna dream or steal, do it BIG
The best things in life aren't things.
lots more junk
Welcome to the forum Ray.
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
12 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest