new grinder base

Sun Nov 27, 2011 7:39 pm

I had a second grinder that I wanted to be able to move around the shop as needed(other is stationary)

The floor in the barn is dirt, so stability was important. Here is what I came up with.
You do not have the required permissions to view the files attached to this post.

Re: new grinder base

Sun Nov 27, 2011 9:46 pm

Recently bought a grinder at auction. Mounted it on a board with a 2x4 on edge, centered under the board. Set the grinder in a vise and tighten. When finished grinding or buffing, move back to shelf.