IH CUB LoBoy Series - 154, 184, 185 Forum -- Questions and answers to all of your LoBoy related issues.
Moderator: Team Cub
Either 'Indian Head' varnish (Gasket cement) - this was 'original' OR 'RTV Cement'. If you use the RTV, coat both sides of the gasket completely (a nice smooth coat - without any 'gobs') - let it air dry for 20 to 30 minutes and then install it. Letting the RTV air dry on the gasket for 20 to 30 minutes will keep the RTV coating from just squeezing out as you tighten the bolts. Personally, I would use the regular old varnish type gasket cement - it seems to last 20 to 30 years without leaking. - NJDale
Is this Permatex Indian Head varnish similar to Form-a-Gasket or Permatex Super-High-Tack?
For Indian Head Varnish, the website says the suggested applications are: Hose connections, paper and cardboard gaskets
- Not for cork?
The Permatex Super-High-Tack has these suggested applications: Seals rubber, cork, paper and composite gaskets and hose connections
I have used it on cork with no problems, works great. Even metal to metal contact, like for seals or the oil filler neck.
In the "review" I did up a while back it's says for use on all common gasket materials.
Permatex Part Number 20539 - Google it. It is of the same age as when the engine was designed - NJDale
Who is online
Users browsing this forum: No registered users and 1 guest