Oh well

Any other helpful tips you may have.

Moderators: Barnyard, Team Cub

User avatar
Merlin
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 940
Joined: Mon Feb 03, 2003 8:06 am
eBay ID: merlin582
Location: Ponchatoula, La.

Postby Merlin » Tue Mar 20, 2007 6:18 am

I don't feel too bad about my experience now. I'll try to make it short. When I built my garage/barn in 1994, it was strictly a temporary structure to get my stuff under roof, and I was recuperating from a heart attack at the time. I didn't put much rebar in the floor because in a couple of years I was going to break it up anyway when I got my new metal building up. Right after it was finished, my Super A needed an axle seal and I was going to install it. I didn't block anything because at that time I went by the old adage that if everything else fails, read the instructions. Well, it failed and the left side hit the floor and knocked a hole in my floor and stuck in the mud under it. I figured it was time to ask for assistance and we finally got it up righted. Between my driving a tractor thru the back wall, breaking a hole in the floor with a maul, dropping a tractor thru the floor, learning that you can never go back to work, wife getting sick, spending over a hundred grand on medical bills without insurance, my temporary garage/barn that has now turned into a permanent structure (that needs rebuilding) has caught the dickens.
The point is, it is a lot safer and better on the wallet to be SAFE and do it right the first time. When I start a tractor project now, I check the board first.
I'm glad nobody was hurt Steve.

Steve in Mo
10+ Years
10+ Years
Cub Star
Cub Star
Posts: 51
Joined: Sun May 01, 2005 6:36 pm
Location: Warrenton Mo.

Oh Well

Postby Steve in Mo » Tue Mar 20, 2007 6:58 am

Please,Please some info on this wedge thing. I have not seen or heard of it before and don't want this to happen to me. I bet I am not the only one who puts the cub up on jack stands without this wedge thing.

User avatar
Rick Prentice
Team Cub Guide
Team Cub Guide
501 Club
501 Club
Posts: 5360
Joined: Mon Nov 01, 2004 7:24 am
Zip Code: 43522
Tractors Owned: 47(circle cub),48(Floyd),49,50demo from GW's collection),51,52(backhoe),53,54,55(Nickles)
Circle of Safety: Y
Location: OH, Grand Rapids (historical town along the Maumee River)

Postby Rick Prentice » Tue Mar 20, 2007 7:06 am

Steve, here's the write-up from the "How-To" section, http://www.farmallcub.com/phpBB2/viewtopic.php?t=18081

Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"

User avatar
kinelbor
10+ Years
10+ Years
501 Club
501 Club
Posts: 1132
Joined: Sun May 29, 2005 1:21 pm
Zip Code: 04762
Location: ME, New Sweden

Postby kinelbor » Tue Mar 20, 2007 7:22 am

I was taking the wheels off my cub once, I had a bar stuck through the front to keep it from tipping, when one wheel came off it wasnt balanced anymore on the jack stands its slide a little bit but I think that bar cought it from going any farther, that sure scared me though. Glad nobody was hurt.
Nik - 1948 Farmall Cub

User avatar
PVF1799
501 Club
501 Club
Posts: 1427
Joined: Fri Mar 15, 2013 9:46 pm
Zip Code: 12009
eBay ID: kepara
Skype Name: ken.rau.57
Tractors Owned: 1929 Farmall Regular (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower.
Circle of Safety: Y
Location: Altamont, NY

Re: Oh well

Postby PVF1799 » Thu May 02, 2013 7:59 am

This really scary. Lost a family friend to a tip-over of a lathe in his machine shop, he too was alone.

When we did our Cub, I purchased six(6) 6-Ton Jack-Stands. It was supported at 5 points and wedged before we started. So glad you were not injured.

Regards, Ken
Ken
Pleasant View Farm - Est. 1799
My Restoration Project - FCUB '48 - Rex

User avatar
pickerandsinger
501 Club
501 Club
Posts: 1182
Joined: Thu Oct 18, 2012 3:23 pm
Zip Code: 13143
Tractors Owned: 1957 Cub Low Boy w/ Danco c3 (Cubby)
1953 Cub w/ sprayer and 54A blade (Chompers)
1954 Cub w/fast hitch (Ira)
1948 Cub ( Papa Paul)
Mutt mix Cub (BattleAxe)
1950 Farmall Cub (basket case demo)
1950 Ferguson TO20 w/ loader (John Henry)
1951 Ferguson TEA 20 (parts)( Uncle Rusty)
F/H Disc Harrow for cub L-38
C-22 Sickle Bar Mower
IH C2 and C3 mower
Universal tool attachment with disc hillers..Rear cultivators (various tips)
Henderson Loader
York Rake for Cub home made
Single bottom Plow for Cub F194
Gravely 5660 12 hp/ w snoblower.rototiller,bush hog
Circle of Safety: Y

Re: Oh well

Postby pickerandsinger » Mon Jul 15, 2013 5:02 pm

We had a philosophy at work.....Fail safely....Power Company, climbing lineman...Distribution and transmission.....It works.....
In Memory of 58,286


Return to “Miscellaneous Ideas”

Who is online

Users browsing this forum: No registered users and 0 guests