I have a B&S small engine that I am not sure what it might have gone on. I assume that with the speed reducer it probably went on a 2 wheel garden tractor, however it has a decal on it that says "Bell Telephone System" on it.
Anyone have any ideas??
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Briggs & Stratton Engine Identification
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- ricky racer
- 10+ Years
- Posts: 6337
- Joined: Wed Sep 12, 2007 8:40 pm
- Zip Code: 49120
- Circle of Safety: Y
- Location: Niles / Buchanan, Michigan
Briggs & Stratton Engine Identification
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Briggs & Stratton Engine Identification
That appears to be a pretty unusual speed reducer, and that along with the apparent age make me think it may have powered a blower or pump for use in manholes. All the units I am familiar with were designed as a one piece unit, but that appears to be much older than anything I am familiar with. Are you sure that is a reducer, and not a step up unit? In which case it could have been used to run a 6 or 12 volt generator or alternator for charging batteries in the field. Of course there is always the possibility that someone put the decal on as a whim, and it really had nothing to do with Bell. If it really was a Bell item it should have a property number on it somewhere, either as a stencil or a riveted tag, though the property number may have been on the complete assembly, not just on the engine.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Briggs & Stratton Engine Identification
Isn't that dark green a standard Bell color from way back when?
-
- 10+ Years
- Posts: 122
- Joined: Wed Oct 26, 2011 9:16 am
- Zip Code: 30549
- Tractors Owned: 62 Cub Lowboy
76 Ford 1600
555 Ford backhoe
67 Cub
Economy Jim Dandy
69 Massey Ferguson 135
Yanmar 2700
Case 1840 skid steer
2 - John Deere model 112 - Location: Georgia, Jefferson
Re: Briggs & Stratton Engine Identification
Ricky, it's amazing what shows up on this forum. I have a Briggs that looks identical to yours, except I don't have the speed reducer. I've had it for probably 40 years or more and I have never seen another one just like it until now. I always thought mine was military surplus only because it was dark green and looked pretty rugged. Can't even remember where I got mine might have come from my dad, not sure. Mine still runs great, and I have it hooked to a small water pump at the present.
Roy
Roy
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: Briggs & Stratton Engine Identification
Rick:
I had to do that with a couple of the old B&S engines Dad has ... so I googled How to Identify Antique Briggs and Stratton Engines and got some good hits:
That is just a start. The last link is pretty interesting. This guy knows a fair amount about identifying B&S engines. Hope this helps a bit.
I had to do that with a couple of the old B&S engines Dad has ... so I googled How to Identify Antique Briggs and Stratton Engines and got some good hits:
- A.S.E.C.C.`s Briggs & Stratton Technical Data
- A.S.E.C.C.`s Briggs & Stratton Engine Identification Methods.
- Brigg's Information
- Identifying Briggs and Stratton B&S Briggs & Stratton Engines
That is just a start. The last link is pretty interesting. This guy knows a fair amount about identifying B&S engines. Hope this helps a bit.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
Return to “Other Tractors and Machinery”
Who is online
Users browsing this forum: No registered users and 18 guests