temp gauge
Moderator: Team Cub
3 posts
• Page 1 of 1
temp gauge
by donut » Tue Jan 17, 2012 12:45 pm
is there anyway i can hook up a temperture gauge on my 140?
- donut
- Posts: 34
- Joined: Sun Jan 15, 2012 1:39 pm
- Zip Code: 70454
Re: temp gauge
by Lt.Mike » Fri Jan 20, 2012 8:00 pm
Oil or water temp?
I've done this for a trans temp sender for my truck. A hole for a electrical temp sender can be drilled in the oil pan or radiator then weld or braze a nut with the proper threads in place that the sender will screw into. I would go this route if a factory option is not available.
Mike.
I've done this for a trans temp sender for my truck. A hole for a electrical temp sender can be drilled in the oil pan or radiator then weld or braze a nut with the proper threads in place that the sender will screw into. I would go this route if a factory option is not available.
Mike.
Quote by Gary Pickeral I like
"If it can cast a shadow, it can be restored"
"If it can cast a shadow, it can be restored"
-
Lt.Mike - 501 Club
- Posts: 588
- Joined: Sun Feb 17, 2008 2:38 am
- Location: Farmingdale NJ
- Zip Code: 07727
- Tractors Owned: '58 International Cub Lo-Boy
2 - '46 International A's
3 posts
• Page 1 of 1
Return to Farmall 100 Series, 100, 130, 140
Who is online
Users browsing this forum: No registered users and 0 guests
|
|