I wonder if there is a problem since I couldn't lift it with the arm. I could hear the high pressure bypass letting fluid through. I had the throttle all the way up. I imagine the bush hog weighs 250 lbs or so.
What do you guys think?
Used the 1000 Loader Today!!!
Moderator: Team Cub
9 posts
• Page 1 of 1
Used the 1000 Loader Today!!!
by BigMatt » Sun Jan 22, 2012 8:36 pm
I bought some stuff at the auction yesterday and unloaded the trailer today! The loader worked. It was a little light on capacity, but I was able to rotate the bucket to get the bush hog up.
I wonder if there is a problem since I couldn't lift it with the arm. I could hear the high pressure bypass letting fluid through. I had the throttle all the way up. I imagine the bush hog weighs 250 lbs or so.
What do you guys think?
I wonder if there is a problem since I couldn't lift it with the arm. I could hear the high pressure bypass letting fluid through. I had the throttle all the way up. I imagine the bush hog weighs 250 lbs or so.
What do you guys think?
- BigMatt
- 501 Club
- Posts: 518
- Joined: Sat Jul 17, 2010 10:41 am
- Location: New Castle, IN
- Zip Code: 46163
- Tractors Owned: 1948 Cub "Moe"
1950 Farmall M
1978 IH 184 
- Circle of Safety: Y
Re: Used the 1000 Loader Today!!!
by Steve Butram » Sun Jan 22, 2012 9:54 pm
there is a presure relief on the loader valve you may want to adjust to get some add lifting power.
Co- hosting Central Indiana Cub Fest near Tipton Indiana September 20-21,2012
-
Steve Butram - Cub Pro
- Posts: 1837
- Joined: Mon Feb 17, 2003 7:53 am
- Location: IN West Lafayette
- Zip Code: 47906
- eBay ID: steveb05
- Tractors Owned: 1947 in well used condition
1948 restored
1948 with 1 arm loader and power steering
1949 for sale
Nice original 1950 just out of the Demo Range
628 2 wheel Trailer
1950 Demo - Circle of Safety: Y
Re: Used the 1000 Loader Today!!!
by BigMatt » Mon Jan 23, 2012 6:42 am
OK, I will look through the operator's manual today.
- BigMatt
- 501 Club
- Posts: 518
- Joined: Sat Jul 17, 2010 10:41 am
- Location: New Castle, IN
- Zip Code: 46163
- Tractors Owned: 1948 Cub "Moe"
1950 Farmall M
1978 IH 184 - Circle of Safety: Y
Re: Used the 1000 Loader Today!!!
by Steve Butram » Mon Jan 23, 2012 7:35 am
It will be under the Acorn Nut on the left side of the valve.
Co- hosting Central Indiana Cub Fest near Tipton Indiana September 20-21,2012
-
Steve Butram - Cub Pro
- Posts: 1837
- Joined: Mon Feb 17, 2003 7:53 am
- Location: IN West Lafayette
- Zip Code: 47906
- eBay ID: steveb05
- Tractors Owned: 1947 in well used condition
1948 restored
1948 with 1 arm loader and power steering
1949 for sale
Nice original 1950 just out of the Demo Range
628 2 wheel Trailer
1950 Demo - Circle of Safety: Y
Re: Used the 1000 Loader Today!!!
by cjpenny89 » Wed Jan 25, 2012 8:21 am
do you have a fast hitch brush hog on that tractor? 4' or 5'? I want to get one for mine or make one!
chad
I have a loader on my 1955 100 and love it! I can pick up a 8' tandem disk with my loader just have to be careful and go slow.
chad
I have a loader on my 1955 100 and love it! I can pick up a 8' tandem disk with my loader just have to be careful and go slow.
"don't find fault, find a remedy"
1948 Cub, 1945 A, 1955 100
1948 Cub, 1945 A, 1955 100
-
cjpenny89 - 501 Club
- Posts: 1051
- Joined: Mon Feb 03, 2003 1:15 pm
- Location: St. Charles, MI 48655
Re: Used the 1000 Loader Today!!!
by BigMatt » Wed Jan 25, 2012 8:52 am
I have 2 fast hitch bush hogs. I am looking to sell one of them.
PM sent...
PM sent...
- BigMatt
- 501 Club
- Posts: 518
- Joined: Sat Jul 17, 2010 10:41 am
- Location: New Castle, IN
- Zip Code: 46163
- Tractors Owned: 1948 Cub "Moe"
1950 Farmall M
1978 IH 184 - Circle of Safety: Y
Re: Used the 1000 Loader Today!!!
by cjpenny89 » Wed Jan 25, 2012 3:10 pm
pm sent back I think I will take it
"don't find fault, find a remedy"
1948 Cub, 1945 A, 1955 100
1948 Cub, 1945 A, 1955 100
-
cjpenny89 - 501 Club
- Posts: 1051
- Joined: Mon Feb 03, 2003 1:15 pm
- Location: St. Charles, MI 48655
Re: Used the 1000 Loader Today!!!
by BigMatt » Wed Jan 25, 2012 6:28 pm
OK, I went out and adjusted the pressure relief today after work. It is running really well now. I adjusted it so that it would just pick up the bush hog without bypassing at all. I don't have a 1500 PSI gauge. I also ran both rams against a stop and the hoses held, so the relief is still doing it's job.
Maybe I will be able to rig up a high pressure gauge from work and check the pressure. I'll have to look for one.
Maybe I will be able to rig up a high pressure gauge from work and check the pressure. I'll have to look for one.
- BigMatt
- 501 Club
- Posts: 518
- Joined: Sat Jul 17, 2010 10:41 am
- Location: New Castle, IN
- Zip Code: 46163
- Tractors Owned: 1948 Cub "Moe"
1950 Farmall M
1978 IH 184 - Circle of Safety: Y
Re: Used the 1000 Loader Today!!!
by cjpenny89 » Thu Jan 26, 2012 7:31 am
I may have a gauge for you!
"don't find fault, find a remedy"
1948 Cub, 1945 A, 1955 100
1948 Cub, 1945 A, 1955 100
-
cjpenny89 - 501 Club
- Posts: 1051
- Joined: Mon Feb 03, 2003 1:15 pm
- Location: St. Charles, MI 48655
9 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest
|
|