Link below. This is on the Garden Tractor web site.
http://gardentractortalk.com/f93-garden ... made-9473/
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Box Grader, Ripper
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
Eugene
- Team Cub Mentor
- Posts: 20367
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Box Grader, Ripper
I have an excuse. CRS.
-
SONNY
- 10+ Years
- Posts: 4103
- Joined: Thu Nov 09, 2006 11:26 pm
- Zip Code: 61722
Re: Box Grader, Ripper
That is some nice stuff on there!!!! thanks; sonny
-
BigBill
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: Box Grader, Ripper
Nice stuff there. I made my own ripper using the single tooth ripper from TSC i made the 3pt hitch to fit my int154 cub. I been doing test drainage trenches with it to see were they could be best used with curtain drains and drain pipes. One single trench stopped the water completely so these little tools work great.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
'Country' Elliott
- Cub Pro
- Posts: 2575
- Joined: Mon Feb 03, 2003 5:25 am
- Zip Code: 37774
- Tractors Owned: 1948 McCormick-Deering Farmall Cub
152 Disc Plow & Flat Belt Pulley
Brinly #8 Moldboard Plow
1971 JD 112 Garden Tractor
1928 Economy Hit & Miss Engine
1927 David Bradley "Little Wonder" Feed Grinder
1 A.H. Patch Corn Shellers
1 A.H. Patch #1 Grist Mill - Circle of Safety: Y
- Location: TN, Loudon (near Knoxville)
Re: Box Grader, Ripper
Here are photos of my Gannon Earthcavator (originally found with Sears 3-point hitch). I converted it to fit a sleeve hitch and restored it to fit my JD 140 H3. Gannon Earthcavators have the ripper teeth, and when the vertical lever is pulled forward, the implement can be used as a ripper (with the teeth straight down) or back blade grader (pushed in reverse, as shown in the bottom photo), or as a front blade grader (pulled forward as shown in the upper photo). These are very rare to come across, and restored will sell for about $500.00 ...'Country'
"Save The Possums...Collect The Whole Set"
"Tennessee Sun-Dried Possum...Heaven In A Can"
"Tennessee Sun-Dried Possum...Heaven In A Can"
Return to “Other Tractors and Machinery”
Who is online
Users browsing this forum: No registered users and 5 guests
