Yogie wrote:cowboy wrote:Thanks Yogie
I have to pop the bead on one tire and clean it as its leaking air all the way around it. I've seen what happens when a hose blows on the boom of a excavator. Definitely don't want to be under one!
Braking the bead down is easy Billy since they're usually a half size, let the air out and it'll probably unseal on it's own.
Might need to place a ratchet strap around the outside to get it to seal back up.
I was wondering how hard it was going to break the bead. I've never seen a 1/2 bead before but I was looking at and thought there wasn't much bead there. And was thinking that it might be super tight since there was less. Glad to hear its not so.