Adapt a Woods L59???

IH CUB LoBoy Series - 154, 184, 185 Forum -- Questions and answers to all of your LoBoy related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
fordyford
Posts: 46
Joined: Sun Dec 18, 2011 5:25 pm
Zip Code: 37857

Adapt a Woods L59???

Postby fordyford » Tue Feb 07, 2012 12:18 am

Has anyone had any experience with adapting a Woods L59 from another make tractor to a 184 LoBoy, in lieu of its specific 59LB? Don't have a problem with fabricating brackets or welding. Curious if the L59's are the same basic mower assembly, but with different mounting points for each application. Rotation the same? THANKS!!
Some of my ancestors mighta hanged by their necks, but none of them ever hanged by their tails.

User avatar
RaymondDurban
Team Cub Mentor
Team Cub Mentor
501 Club
501 Club
Posts: 4386
Joined: Wed Dec 26, 2007 7:45 pm
Zip Code: 32536
Circle of Safety: Y
Location: FL, Crestview

Re: Adapt a Woods L59???

Postby RaymondDurban » Tue Feb 07, 2012 1:09 am

They are the same basic deck, but with different spindles that rotate in the opposite directions. You can either get the deck and swap the spindles/blades with those from a regular 59, or put a twist in the belt so that the blades rotate and cut in the proper direction.
If it were me, I believe I'd hold off a bit and look for a deck that didn't require modifications or crafty ingenuity to get it to work. Come spring time they will surface!

fordyford
Posts: 46
Joined: Sun Dec 18, 2011 5:25 pm
Zip Code: 37857

Re: Adapt a Woods L59???

Postby fordyford » Tue Feb 07, 2012 12:05 pm

Thanks for the advice. I would presume that's because of the opposite rotation of the IH PTO.
What direction should the blades rotate, looking down at the deck from above? I've confused myself!!
Some of my ancestors mighta hanged by their necks, but none of them ever hanged by their tails.

User avatar
twotone
5+ Years
5+ Years
501 Club
501 Club
Posts: 1116
Joined: Sat May 14, 2011 6:09 pm
Zip Code: 15132
Tractors Owned: 53 F Cub
73 F Cub
53 Super A With Snow/Grader Blade
193 Plow With Colter And Jointer
144 Cultivators
22 Mower
Circle of Safety: Y
Location: Versailles,Pa.

Re: Adapt a Woods L59???

Postby twotone » Tue Feb 07, 2012 2:33 pm

I have a 59LB I've had in the for sale section several times with no takers at $400.00 in excellent shape. (Shameless Plug)
Know Your Cub, And Your Cub Will Know You.

Tom

User avatar
Into Tractors
10+ Years
10+ Years
501 Club
501 Club
Posts: 1603
Joined: Sat Jun 03, 2006 8:09 am
Zip Code: 45387
Location: Yellow Springs, Ohio

Re: Adapt a Woods L59???

Postby Into Tractors » Tue Feb 07, 2012 5:01 pm

Well I sort of did the opposite, as already mentioned the decks are pretty much the same, just various hangers and the mule-drives are different. The '50 Cub I bought came with various implements, and one was a woods 59" mower, but it wasn't attached to the tractor. After starting the re-fab I realized that mower deck wouldn’t have ever been attached as it has the hangers for either a 154/185/184 series or perhaps another brand of tractor.

I ended up getting all the proper mounting hardware from Ralph and on eBay and such and converted it to attach to a standard F-Cub.

I "Might" still have some of the previous parts laying around, I'll check and if I find them I can post/send some pics of them and see if they are what are needed to attach to a 1854 series?
Mike Duncan

fordyford
Posts: 46
Joined: Sun Dec 18, 2011 5:25 pm
Zip Code: 37857

Re: Adapt a Woods L59???

Postby fordyford » Wed Feb 08, 2012 8:50 pm

Thanks!

Twotone: sent you a PM

Into Tractors: Pics would be great; send to fordyford@att.net
Some of my ancestors mighta hanged by their necks, but none of them ever hanged by their tails.

User avatar
gitractorman
10+ Years
10+ Years
501 Club
501 Club
Posts: 2429
Joined: Mon Oct 24, 2005 11:35 am
Zip Code: 14072
eBay ID: toysforjake
Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Circle of Safety: Y
Location: Grand Island, NY

Re: Adapt a Woods L59???

Postby gitractorman » Fri Feb 10, 2012 5:02 pm

One thing to watch on the deck is the actual spindle belt pulley diameter. Woods made the same 59" deck for nearly every tractor in production, but a big difference between them all is the size of the pulley used on the PTO and the size of pulley used on the spindles. One of the tractors (Ford I think) had a huge PTO pulley, about 16-inches in dimeter. Most others use a PTO pulley about 6-inches or 8-inches in diameter, even though they all use a pto speed of 540 RPM. The different PTO pulleys have to be mated to different spindle pulleys to get the correct blade speed.
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller

User avatar
Into Tractors
10+ Years
10+ Years
501 Club
501 Club
Posts: 1603
Joined: Sat Jun 03, 2006 8:09 am
Zip Code: 45387
Location: Yellow Springs, Ohio

Re: Adapt a Woods L59???

Postby Into Tractors » Sat Feb 18, 2012 3:05 pm

fordyford wrote:Thanks!

Twotone: sent you a PM

Into Tractors: Pics would be great; send to fordyford@att.net

I uploaded 3 pics to my gallery on the PhotoHost, the name of the folder is: "Mower brackets & Mule drive". You can look at them, as well as others, as they may be able to comment on what tractor they are meant to be used on.

I'm not sure what application the mule drive assembly is for, but I think the rear hangers are for a number series lowboy?

http://photos.cubfest.com/thumbnails.php?album=1321
Mike Duncan


Return to “LoBoy Series - 154, 184, 185”

Who is online

Users browsing this forum: No registered users and 0 guests