Post your introduction and "get to know me" information in this forum.
Moderator: Team Cub
by boilerman » Tue Feb 14, 2012 9:31 am
Hi All, I just got a 56 Cub this past summer. She sat for 10 years and is in rough shape but I did get it to run when I got it and was some what in pieces but it came with plow, disc, push blade, sickelbar w/the pully, belly mower, cultivators, spike tooth harrow, and manuals for most of them and the tractor for the price of $1000....not real sure but I feel I did not get hurt on it. I have put new rings in it, #1 cyl. broken compression ring and all cyl. had bad oil rings, rebuilt the hydralics, I can't stand wheepy hydros., and replaced the 1 rear tire as it was rotten and the other was new so I put a like new with rim and all on and tighten up the steering to take the high speed death wobble out, and had the Generator gone over, and changed all fluids, so I am into it for 1500 bucks and now getting ready to make her pretty. I have done 8 and 9N's in the past so this will be the first Cubby and must admit for some reason I am growing feelings for this little tractor and just may keep her. I am sure that I will be askin alot of questions and some will be head smacking simple. I am a Stationary Engineer by trade, single no kids(that I know of), non-PC, Hillbilly and proud of it, also I am hopeing the software here will catch any Bombs I may drop so I don't offened anyone..lol Clay
I don't suffer from insanity, I enjoy every minute of it.
-
boilerman
-
- Posts: 8
- Joined: Tue Feb 14, 2012 8:56 am
- Zip Code: 44645
by dgrapes59 » Tue Feb 14, 2012 10:00 am
Boilerman,
Welcome to the Forum! Congratulations on getting your FIRST Cub, it sounds like you may have caught the fever.
Check out the announcement section for Cub Fests, I encourage you to head south for a couple in Ohio later this year, you won't be disapointed.
Good luck,
David
-

dgrapes59
- 501 Club

-
- Posts: 2377
- Joined: Sun Jul 13, 2008 10:05 pm
- Location: OH, Liberty Township (45044) (southwest OH)
- Zip Code: 45044
- Tractors Owned: 1951 Cub
1955 Loboy a few plows, mowers, blades and such Several '61 CC Originals, CC 70 & 100, Couple CC 122's, '69 CC 124, '69 CC 73, various CC implements #2 Trailer, 1963 Springfield, Mid-70's Simplicity

- Circle of Safety: Y
by Denny Clayton » Tue Feb 14, 2012 10:29 am
Welcome Clay. Sounds like you have a great Cub for the money. Do you know Kevin Ketcham? He is is from Marshallville, also. A longtime member here.
'61 Lo-Boy '60 FH Lo-Boy '60 Lo-Boy '57 FH Cub "Rusty" '56 FH Cub (2) '48 Cubs '75 IH 140 w/1000 loader C-3 mower, FH Woods 42F, 22 sickle (2), 54A blade, L-54 blade, 194 plow, FH L-38 disk, FH LB disk, 144 cultivators, FH platform carrier
-

Denny Clayton
- 501 Club

-
- Posts: 3257
- Joined: Wed Feb 05, 2003 1:18 pm
- Location: OH, Sidney
- Zip Code: 45365
- Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.

- Circle of Safety: Y
by ScottyD'sdad » Tue Feb 14, 2012 11:03 am
Denny Clayton wrote:Welcome Clay. Sounds like you have a great Cub for the money. Do you know Kevin Ketcham? He is is from Marshallville, also. A longtime member here.
Denny, some of us won't admit to knowing Kevin!  Ed
50 ,52,53,56,59 F Cubs, 55,55,57,63,63 fast hitch, 64 lo-boys, 71 154, 184 lo-boy,61 cadet original. IH spreader,IH corn grinder, Oli. OC3 ,AC D10 ,IH 444 , Potato digger, wagner ldr 3 power units.
-
ScottyD'sdad
- Cub Pro

-
- Posts: 4608
- Joined: Thu Aug 31, 2006 7:00 pm
- Location: Ma. Rehoboth
- Zip Code: 02769

- Circle of Safety: Y
by boilerman » Tue Feb 14, 2012 12:25 pm
I have heard of the name, we may have a common friend that I just refer to as Deputy Scott or Popo Scott and I am sure I heard the name Nussbaum (sp) I think has a body shop and raises Shepards (Dixies doing great and my dog and her are buddies). They also may have heard of me as The Hillbilly.
I don't suffer from insanity, I enjoy every minute of it.
-
boilerman
-
- Posts: 8
- Joined: Tue Feb 14, 2012 8:56 am
- Zip Code: 44645
by boilerman » Tue Feb 14, 2012 12:36 pm
 ...trying to post a pic.
I don't suffer from insanity, I enjoy every minute of it.
-
boilerman
-
- Posts: 8
- Joined: Tue Feb 14, 2012 8:56 am
- Zip Code: 44645
by boilerman » Tue Feb 14, 2012 12:40 pm
 Before I started work on it.
I don't suffer from insanity, I enjoy every minute of it.
-
boilerman
-
- Posts: 8
- Joined: Tue Feb 14, 2012 8:56 am
- Zip Code: 44645
by Gary Dotson » Wed Feb 15, 2012 8:29 am
Well, Clay, once you meet Kevin, you'll never forget him, he won't let you! Welcome to the forum!
-
Gary Dotson
- Cub Pro

-
- Posts: 2344
- Joined: Thu Aug 03, 2006 6:20 am
- Location: OH West Mansfield
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter) 52 Cockshutt 20 unrestored 47 Leader "B" (Herckie) 49 Leader "D" (Princess) 49 Leader "D" very rough 48 Leader "D" unrestored Kubota B6200E Kubota B6200HST Kubota B8200HST-D

- Circle of Safety: Y
by boilerman » Wed Feb 15, 2012 9:52 am
Gary Dotson wrote:Well, Clay, once you meet Kevin, you'll never forget him, he won't let you! Welcome to the forum!
LOL...that works both ways.
I don't suffer from insanity, I enjoy every minute of it.
-
boilerman
-
- Posts: 8
- Joined: Tue Feb 14, 2012 8:56 am
- Zip Code: 44645
by Mike in Louisiana » Thu Feb 23, 2012 4:00 pm
Clay, Welcome to the forum, I am sure you will like it here.
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H
Good judgment comes from experience, and a lot of that comes from bad judgment. Will Rogers
-

Mike in Louisiana
- 501 Club

-
- Posts: 3675
- Joined: Tue Feb 15, 2005 10:10 am
- Location: LA, Doyline
- Zip Code: 71023

- Circle of Safety: Y
by randallc » Thu Feb 23, 2012 9:26 pm
Welcome to the forum. A great place to spend some prime time!
Guiena, 1951 Farmall Cub; Jumping Willy, 1949 Farmall Cub.
-

randallc
- 501 Club

-
- Posts: 783
- Joined: Tue Jan 18, 2011 9:16 am
- Location: Witcherville, AR
- Zip Code: 72940
- Tractors Owned: 1951 Farmall Cub, 152 disk plow, 2 gang disk, belly mower, sickle mower
1949 Farmall Cub, cultivator, moldboard plow, disk,front blade. Cub Cadet, LTX1045 Mower.

- Circle of Safety: Y
by boilerman » Mon Mar 05, 2012 6:37 pm
Denny Clayton wrote:Welcome Clay. Sounds like you have a great Cub for the money. Do you know Kevin Ketcham? He is is from Marshallville, also. A longtime member here.
The boys were over and drinking a few adult beverages in the garage and I was showing my latest toy off and one of them (his name is Webster) asked if I knew of a Kevin and that Kevin was the go to man in the area for Cubbies and or Farmall....one thing about a small town, everybody knows everybodies business
I don't suffer from insanity, I enjoy every minute of it.
-
boilerman
-
- Posts: 8
- Joined: Tue Feb 14, 2012 8:56 am
- Zip Code: 44645
Return to Introduce Yourself
Who is online
Users browsing this forum: No registered users and 0 guests
|
|