Tried google, but kept coming up with porno sites and ebay...
The PTO on the numbered Loboy is also backwards and engine RPM, right?
PTO speed and direction
Moderator: Team Cub
4 posts
• Page 1 of 1
PTO speed and direction
by Matt Kirsch » Wed Feb 15, 2012 4:04 pm
- Matt Kirsch
- 501 Club
- Posts: 2943
- Joined: Tue Jun 08, 2004 3:04 pm
- Location: Rochester, NY
- Zip Code: 00000
- Circle of Safety: Y
Re: PTO speed and direction
by Harold R » Wed Feb 15, 2012 4:45 pm
Counterclockwise rotation. Low idle is listed at about 390 rpm, high idle listed at 1970 rpm.
That's what's listed in the owners manual under "specifications". With it being on a separate shaft,I'm not sure if it's exactly the same as engine RPM. Guess that would depend on the pulley sizes.
That's what's listed in the owners manual under "specifications". With it being on a separate shaft,I'm not sure if it's exactly the same as engine RPM. Guess that would depend on the pulley sizes.
- Harold R
- TeamCubGuide
- Posts: 2978
- Joined: Thu Feb 20, 2003 4:54 pm
- Location: Louisiana
- Zip Code: 71058
- Tractors Owned: 1948,50,53, and 56 Farmall Cubs
1969 International Cub - Circle of Safety: Y
Re: PTO speed and direction
by RaymondDurban » Wed Feb 15, 2012 11:05 pm
From an earlier post a few threads down...
Although I've never measured them, I suppose it's the offset pulley setup that slow the PTO down a bit from engine RPMs.
PTO speeds on a 184 and 185 are 2050 and 1880 rpm at high idle and under load.
PTO speed on a 154 is 1970 and 1800 rpm, high idle and under load....
Although I've never measured them, I suppose it's the offset pulley setup that slow the PTO down a bit from engine RPMs.
-
RaymondDurban - Cub Pro
- Posts: 3775
- Joined: Wed Dec 26, 2007 7:45 pm
- Location: CO, Peyton
- Zip Code: 80831
- Circle of Safety: Y
Re: PTO speed and direction
by Hamiltonbob » Sun Mar 18, 2012 8:17 am
Good Morning
This little, expensive guy, on EBay is what changes a Numbered Cub PTO shaft size,rotation direction, and speed to a Standard Pto Usage
--"International cub reverser-reducer' item # 140722734931. Hamiltonbob
This little, expensive guy, on EBay is what changes a Numbered Cub PTO shaft size,rotation direction, and speed to a Standard Pto Usage
--"International cub reverser-reducer' item # 140722734931. Hamiltonbobfor quality IH Cub loboy 154, 184, 185 parts visit http://www.hamiltonbobscubs.com
- Hamiltonbob
- Cub Star
- Posts: 75
- Joined: Tue Jun 26, 2007 6:08 am
4 posts
• Page 1 of 1
Return to LoBoy Series - 154, 184, 185
Who is online
Users browsing this forum: No registered users and 2 guests
|
|