How to Build a Battery Box

Mon Feb 20, 2012 2:58 pm

Finished my battery box project for Nellie ('47 Circle Cub) this weekend. It was a fun and rewarding project.

Here's some pictures:

Started with the old battery box from my '48 Cub. It's a little ragged, but complete. This is what I used for the model; the brake is also shown:

Image

First thing was to make a decision about the base. I could not form/shape/mold the base of the box like the original, but needed to come up with a way to keep the overall size and look of the original. Decided to use a flat piece of sheet metal for the inside base with access holes leading to two runners. This would allow the bolt heads to be recessed and keep the looks of the box on the outside. Here's the layout of the runners:

Image

Image

Image

Image

Image

Next was the bottom, inside plate:

Image

Image

Had to slope the ends to mimick the original:

Image

Image

Image

Now for the base:

Image

Image

You can see it taking shape:

Image

Here, with all the sides bent:

Image

Next, drill out the access holes:

Image

Runners are ready to be welded in place:

Image

Cut and bent the lid and rear light holders for the back of the box, the front, and the sides. New ones are just laying on the old box on the left:

Image

Image

The hardest was the top. It had to fit tight, but not too tight, encompassing the sides and front. Here's how that went:

Image

Layed out my lines then made a little extra cut in the corner:

Image

Bent the two sides, then had to use the bench vise to hold and bend the back and front (wouldn't fit in the metal brake):

Image

With a little adjustment and patience, the pieces are all done and welded:

Image

Took the seat post and differential shaft housing, bolted in the new box and new toolbox to see how they fit. Believe it's gonna work (oh yeah, had some sheet metal left over so made a couple PTO shields):

Image

Image

Re: How to Build a Battery Box

Mon Feb 20, 2012 3:11 pm

Stanton:

This is pretty much how Richard and I made the dozen or so boxes back in 2003/2004 in my battery box project for Ellie-Mae. The only major difference was that we actually cut out the strips of metal where the runners would be welded.

This will be useful for those who have the desire to make their own boxes. 16 gauge has lasted 8 years so far with no hint of rust :D

Re: How to Build a Battery Box

Mon Feb 20, 2012 3:20 pm

You're just having too much fun with that new brake, aren't you??

You're my hero!!
Image

Keep 'em coming!!

Re: How to Build a Battery Box

Sun Mar 04, 2012 10:20 am

Excellent job on that box! Might you be able to post the dimensions? I might give it a whirl. Thanks!