Helicoil-ing implement mounting hole on Super A bellhousing

Farmall Super A, AV, 100, 130, & 140 1939 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
Super A
10+ Years
10+ Years
501 Club
501 Club
Posts: 4104
Joined: Mon Jan 26, 2004 10:53 am
Zip Code: 28521
Tractors Owned: 1949 Cub "The Paperweight"
Cub powered IH 52R combine
Grandfather's 1948 Super A
White demo Super A-"Ol Whitey"
1950 Super A "Old Ugly"
1954 Super A-1
856
Buncha other junk
Circle of Safety: Y
Location: NC, Jacksonville area

Helicoil-ing implement mounting hole on Super A bellhousing

Postby Super A » Wed Feb 22, 2012 9:11 am

Old Ugly, my latest Super A, has a semi-stripped out implement mounting hole on the bellhousing, I am guessing from someone running a fertilizer attachment for a long time with loose bolts. I've never used a helicoil, but am familiar with them and have read the how-to article on the forum. Has anyone had to actually repair one of these holes on a Super A-140? Only thing I am worried about is finding a hand-held drill with enough OOMPH to drill the hole out. I have access to a small, "tabletop" drillpress and have gone so far as to consider removing the gas tank, and "straddling" the bellhousing with it to drill the hole, but I don't think the work table on the drillpress is deep enough.

Ideas or suggestions are very much welcome!

Al
White Demo Super A Restoration Updates

Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
501 Club
501 Club
Posts: 21532
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Re: Helicoil-ing implement mounting hole on Super A bellhous

Postby John *.?-!.* cub owner » Wed Feb 22, 2012 9:47 am

check a local tool rental place the Hole Hawg type drills are real good for that type work. The long handle makes control a lot easier. I do not know if it is mentioned in the how to, but do NOT use oil when drilling cast iron. You can do it with a smaller drill, it just requires going slower and being more careful.

Image

I have one of these with a 5/8 chuck which works quite well for this.
http://www.harborfreight.com/compact-2- ... 97622.html
If you are not part of the solution,
you are part of the problem!!!

Former Member
5+ Years
5+ Years

Re: Helicoil-ing implement mounting hole on Super A bellhous

Postby Former Member » Wed Feb 22, 2012 11:16 am

Al, I have had great luck with this. It is Permatex Thread repair kit, part # 765-1248. I get it at NAPA for $13.50

I have repaired final drive bolt holes, carb inlet threads, anywhere the bolt is loose and sloppy. It has held up great in both the finals and carbs.

It withstands chemicals and is good up to 128ft lb of torque.

Make sure you use a clean new bolt, clean the threads in the hole real well, then make sure you use plenty of the release agent on the bolt.

It says wait 5 min before removing bolt, I like to let it sit a couple hours.
You do not have the required permissions to view the files attached to this post.

User avatar
Boss Hog
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 10192
Joined: Mon Oct 24, 2005 8:35 pm
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety: Y
Location: VA. Randolph

Re: Helicoil-ing implement mounting hole on Super A bellhous

Postby Boss Hog » Wed Feb 22, 2012 12:18 pm

Al any 1/2 in drill will do the job , make sure it has a handle on the side so it does not grab and spin out of yout hand, the cast is EZ to drill into
Get the right size bit
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg

Bob McCarty
Team Cub Mentor
Team Cub Mentor
501 Club
501 Club
Posts: 7591
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: Helicoil-ing implement mounting hole on Super A bellhous

Postby Bob McCarty » Wed Feb 22, 2012 1:48 pm

I've used this type of solid insert several times with good results. It takes a standard drill and tap. Image Picture is from McMaster-Carr

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein

User avatar
Rudi
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 28707
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada

Re: Helicoil-ing implement mounting hole on Super A bellhous

Postby Rudi » Wed Feb 22, 2012 1:53 pm

Al:

As in my Helicoiling Ellie's Rear Final, I found this drill to be the cat's meow when it comes to heli-coiling. Variable speeds are really useful. You should be able to find one of these at a yard sale, flea market and such.

Image
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship


User avatar
Dale Finch
5+ Years
5+ Years
501 Club
501 Club
Posts: 2193
Joined: Tue Apr 27, 2010 11:34 am
Zip Code: 27517
Tractors Owned: '55 Cub "Bertha"
'55 Cub "Ben"
'55 Cub "Bailey"
'56 Cub "Boris"
'48 Super A "Bubba"
Circle of Safety: Y
Location: NC, Chapel Hill

Re: Helicoil-ing implement mounting hole on Super A bellhous

Postby Dale Finch » Wed Feb 22, 2012 7:35 pm

I HeliCoiled a final bolt hole on my SA, and I must say, it would have been easier to remove the final to do it!!! I lay on the concrete under the tractor, using a drill with the side handle (because that sucker DOES grab frequently!). I did have the mechanic start it for me, because I couldn't get the bit to start cutting without jamming at first. After he started it, with me keeping it squared up, I took over. It was fairly slow going, but doable. You do need to use a cutting oil...I didn't have any so just used PB Blaster. After the drilling, everything else was VERY easy...threadlocker was used when inserting the coil.

Image

Image

Image

Image

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
501 Club
501 Club
Posts: 21532
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Re: Helicoil-ing implement mounting hole on Super A bellhous

Postby John *.?-!.* cub owner » Wed Feb 22, 2012 8:43 pm

Rudi, I have a twin to that drill,except mine does not have a toggle switch on the handle.
If you are not part of the solution,
you are part of the problem!!!

User avatar
Rudi
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 28707
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada

Re: Helicoil-ing implement mounting hole on Super A bellhous

Postby Rudi » Wed Feb 22, 2012 8:48 pm

I remember. Mine is a Mastercraft a house brand from a major supplier but I can't remember who it is. Is it a Skil, B&D or ????? I love it, it really is one heck of a drill :D Lots of torque and variable speed. The toggle is just for forward/reverse.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship



Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: CDD and 0 guests