Fri Jan 13, 2012 10:14 am
cowboy wrote:Thanks Yogie
I have to pop the bead on one tire and clean it as its leaking air all the way around it. I've seen what happens when a hose blows on the boom of a excavator. Definitely don't want to be under one!
Braking the bead down is easy Billy since they're usually a half size, let the air out and it'll probably unseal on it's own.
Might need to place a ratchet strap around the outside to get it to seal back up.
I was wondering how hard it was going to break the bead. I've never seen a 1/2 bead before but I was looking at and thought there wasn't much bead there. And was thinking that it might be super tight since there was less. Glad to hear its not so.
Mon Feb 06, 2012 11:41 pm
Cowboy I like that, and that is about the best price I've seen for new equipment, would you have a link to where you picked that piece up at? Thanks
Tue Feb 07, 2012 11:07 am
Sure do Michael
They also have a lot of other attachments.http://www.wildkatattachments.com/grapple.html
Mon Feb 27, 2012 8:49 pm
I've pretty much made my mind up on the double cylinder econo Billy ,just haven't decided on the 66" or the 72" probably be the 72" due to my bucket being that size and it gives me 2"s on the outside of my front wheels. Make sense or does it matter for that attachment?
Tue Feb 28, 2012 4:32 pm
Michael I'm not sure if it makes much difference on a grapple bucket. But I got the 66" but that is two inches wider than my tires too. But it does make sense that you would want to clear the width of your tire track.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.