Post your introduction and "get to know me" information in this forum.
Moderator: Team Cub
9 posts • Page 1 of 1
I'm a proud Papa to a 185 and I'm looking forward to piece-by-piece restoration and mods. My 'Baby' is in good running order and she's got my palms sweating whenever I see Attachment auctions, but (so far) I'm holding off. I have Plow, Disc, Harrow, Cultivators, and several other 3-pt toys I'm prepping for Spring planting chores and her Woods is getting cleaned, blasted & painted (nice new blades) before the long hat summer's cutting chores (and, after reading, I realize that her Creeper is going to be a real plus).
I'm doing research on a Loader for her and (from what I'm reading) getting enough spin-up on the Pump is an issue. I intend to do some engine mods to boost her output (I'm not a purist when it comes to restoration) and see that the Tranny may be a weak link in the powertrain. I'm already thinking about a little gimmick my Dad did with his A to boost pump speeds (used a beefier pump on a slider mount with a pyramid of pullies on the front to vary speeds up & down).
Dad used an IH 2000 or 2001 Loader on his A; is this realistic on a 185 (or am I trying to put too serious a loader on a Lawn mower)? I've seen the 1000 (not impressed) and the ole Side-arm (doubly underwhelmed). If the 2000 - 2001's not viable I will probably buy and mod something between them and a 1000. I don't plan to move a mountain or dig the Grand, just build or level a lump here & there and lift heavy 'stuff' (maybe dig a Pool). I'd be happy with the front blade but would rather have it on the 3-pt. So, for the front the Wife wants a Loader (I almost fell of my chair when SHE suggested I buy one)!
I do not like the numbered cubs for other than mowing. But if you need any parts I have a 154 with a factory 3 point on it I would really like to sell
welcome to the forum
IN GOD WE TRUST
All others pay cash
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
Welcome to the Forum. You'll find a lot of knowledgeable Cub lovers here. Be sure and ask any questions you might have.
"We don't need to think more,
we need to think differently."
Welcome to the Forum!!
I wouldn't say that the transmission is the weak link. It's the same basic unit as the older FCubs and is overbuilt for the Cubs engine. The only downfall in my opinion is the clutch setup on the 185. If it's properly adjusted and maintained, it'll work as it's supposed to. But if it's not kept up with, it can be aggravating.
Keep in mind that this tractor is just a overgrown lawnmower. There were loaders designed for the numbered LoBoys, and I have no doubt that one can be made or modified to work, but be careful not to overload the little guy!!
Good luck and let us know what we can do to help!
FCub - LoBoy - Numbered Series Databases
Welcome to the forum.
"I ain't believing this!"
Welcome to the forum. There is a wealth of information here.
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
REMEMBER: Keep it correct or you may face the
G'day and congrats on your new to you 184. Don't have a ton of stuff on the Numbered Series Cubs, but I do have some .. check out the links below
There is a parts catalog for the 154 and I think a lot of those implements/accessories might fit the 184. The other guys will know for sure.
Enjoy you new Cub
9 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest