1pt fash hitch 3pt conversion

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

1pt fash hitch 3pt conversion

Postby Kirk-NJ » Wed Mar 07, 2012 7:55 pm

I when with a friend to pickup some 3pt implements. While at the farm I spotted a 1pt fast hitch 3pt conversion. I ask the farmer about it and he said he had it on his 140 fast hitch, along with a plow that was there. I said I wasn't sure it would fit my cub. He said if it don't fit bring it back. So I made him an offer and took it home and it fit no problem. My question is are these aftermarket or did IH produce any? I can't post any photos because my wife has the camera and won't be back for a couple of days. Will post some photos than.

Kirk
Kirk-NJ
5+ Years
5+ Years
 
Posts: 581
Joined: Sat Jan 03, 2009 1:15 pm
Location: Great Meadows NJ
Zip Code: 07838

Re: 1pt fash hitch 3pt conversion

Postby ricky racer » Wed Mar 07, 2012 9:28 pm

I'd like to see some pictures of that.
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
User avatar
ricky racer
5+ Years
5+ Years
 
Posts: 2829
Joined: Wed Sep 12, 2007 8:40 pm
Location: Niles / Buchanan, Michigan
Zip Code: 49120
Circle of Safety Award
Circle of Safety: Y

Re: 1pt fash hitch 3pt conversion

Postby danovercash » Wed Mar 07, 2012 9:39 pm

Have seen them, Cub could not pick up much without remote cylinder or some such.
"It is impossible for a man to learn what he thinks he already knows." -Epictetus

252646 & 221525. 195897 (Gone but not forgotten!)
http://groups.yahoo.com/group/dansfarmallcub/
danovercash
10+ Years
10+ Years
 
Posts: 2895
Joined: Mon Feb 17, 2003 8:48 pm
Location: NC, Kannapolis
Zip Code: 28081
Circle of Safety Award
Circle of Safety: Y

Re: 1pt fash hitch 3pt conversion

Postby Rick Prentice » Thu Mar 08, 2012 8:34 am

Kirk, here's an old post about some homemade ones: CLICK HERE Get those pics for us so we can compare things for ideas and originality.

Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
User avatar
Rick Prentice
Team Cub Guide
Team Cub Guide
 
Posts: 5359
Joined: Mon Nov 01, 2004 7:24 am
Location: OH, Grand Rapids (historical town along the Maumee River)
Zip Code: 43522
Tractors Owned: 47(circle cub),48(Floyd),49,50demo from GW's collection),51,52(backhoe),53,54,55(Nickles)
Circle of Safety Award
Circle of Safety: Y

Re: 1pt fash hitch 3pt conversion

Postby Boss Hog » Thu Mar 08, 2012 9:35 am

aftrermarket. As far as I know IH never made a 1 point to 3 point and why would they ?
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
User avatar
Boss Hog
Cub Pro
Cub Pro
 
Posts: 9828
Joined: Mon Oct 24, 2005 8:35 pm
Location: VA. Randolph
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety Award
Circle of Safety: Y

Re: 1pt fash hitch 3pt conversion

Postby Kirk-NJ » Thu Mar 08, 2012 12:44 pm

Rick Prentice wrote:Kirk, here's an old post about some homemade ones: CLICK HERE Get those pics for us so we can compare things for ideas and originality.

Rick


I'll have the photos tomorrow. I have looked at some of the photos on this site and haven't seen anything like it. It lifted my york rake ok but barely got my 6' box blade off the ground. I also had the belly mower deck on which I'm sure didn't help. I'll take the mower off and check the fluid which might be a little low.

Kirk
Kirk-NJ
5+ Years
5+ Years
 
Posts: 581
Joined: Sat Jan 03, 2009 1:15 pm
Location: Great Meadows NJ
Zip Code: 07838

Re: 1pt fash hitch 3pt conversion

Postby Kirk-NJ » Fri Mar 09, 2012 9:53 am

Here are some photos of the 1pt fast hitch 3pt conversion. I could not find any tags or markings on it.
Image
Image
Image
Kirk-NJ
5+ Years
5+ Years
 
Posts: 581
Joined: Sat Jan 03, 2009 1:15 pm
Location: Great Meadows NJ
Zip Code: 07838

Re: 1pt fash hitch 3pt conversion

Postby Jim Becker » Fri Mar 09, 2012 10:18 am

Looks like an IH 2-point to 3-point adapter that somebody modified.
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11976
Joined: Sun Feb 02, 2003 3:14 pm
Location: MN
Zip Code: 55319
Circle of Safety Award
Circle of Safety: Y

Re: 1pt fash hitch 3pt conversion

Postby Kirk-NJ » Fri Mar 09, 2012 10:31 am

I thought that the 2 pt hitch point was a differnet size than the smaller one used on a cub. Am I wrong on this?
Kirk-NJ
5+ Years
5+ Years
 
Posts: 581
Joined: Sat Jan 03, 2009 1:15 pm
Location: Great Meadows NJ
Zip Code: 07838

Re: 1pt fash hitch 3pt conversion

Postby Rick Prentice » Fri Mar 09, 2012 11:23 am

I like how the top link/pin setup has the ability to rotate for pin alignment. The only issue I can see right off the bat is the standard width of the bottom mounts. When I made mine, I noticed several different widths that varied with each brand of equipment. Some pins were facing in, some facing out, etc. That may give you fits till you get all your 3point stuff set up the same. Definitely looks well made. Thanks for the pics.

Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
User avatar
Rick Prentice
Team Cub Guide
Team Cub Guide
 
Posts: 5359
Joined: Mon Nov 01, 2004 7:24 am
Location: OH, Grand Rapids (historical town along the Maumee River)
Zip Code: 43522
Tractors Owned: 47(circle cub),48(Floyd),49,50demo from GW's collection),51,52(backhoe),53,54,55(Nickles)
Circle of Safety Award
Circle of Safety: Y

Re: 1pt fash hitch 3pt conversion

Postby Denny Clayton » Fri Mar 09, 2012 11:27 am

Your fast hitch is not assembled correctly. The "knuckles" on each end of the pull bar support assembly are upside down. You can tell by the grease zerks pointing down instead of up. You will gain some additional lift height by changing that. I had one that way last year when I brought it home and it just didn't look right. After comparing it to another FH and the manual I finally figured it out. :roll: If a FH has ever been disassembled, it's an easy thing to get upside down.

Image
'61 Lo-Boy
'60 FH Lo-Boy
'60 Lo-Boy
'57 FH Cub "Rusty"
'56 FH Cub
(2) '48 Cubs
'75 IH 140 w/1000 loader
C-3 mower, FH Woods 42F, 22 sickle (2), 54A blade, L-54 blade, 194 plow, FH L-38 disk, FH LB disk, 144 cultivators, FH platform carrier
User avatar
Denny Clayton
10+ Years
10+ Years
 
Posts: 3694
Joined: Wed Feb 05, 2003 1:18 pm
Location: OH, Sidney
Zip Code: 45365
Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.
Circle of Safety Award
Circle of Safety: Y

Re: 1pt fash hitch 3pt conversion

Postby Kirk-NJ » Fri Mar 09, 2012 11:42 am

Thanks for letting me know. I bought the tractor from original owner's daughter who said he had the hitch added later. He probably bought it use and was assembled wrong. I never noticed it until you pointed it out. It's red instead of yellow like the rest of the tractor.
Kirk-NJ
5+ Years
5+ Years
 
Posts: 581
Joined: Sat Jan 03, 2009 1:15 pm
Location: Great Meadows NJ
Zip Code: 07838

Re: 1pt fash hitch 3pt conversion

Postby Matt Kirsch » Fri Mar 09, 2012 2:44 pm

I've seen the "knuckles" both ways...
Matt Kirsch
10+ Years
10+ Years
 
Posts: 3398
Joined: Tue Jun 08, 2004 3:04 pm
Location: Rochester, NY
Zip Code: 14559
Circle of Safety Award
Circle of Safety: Y

Re: 1pt fash hitch 3pt conversion

Postby Denny Clayton » Fri Mar 09, 2012 3:38 pm

Matt Kirsch wrote:I've seen the "knuckles" both ways...

So have I, but only one way is correct. Either will work, but the correct way is also structurally stronger when lifting to the FH capacity and it gives a slightly higher lift.
'61 Lo-Boy
'60 FH Lo-Boy
'60 Lo-Boy
'57 FH Cub "Rusty"
'56 FH Cub
(2) '48 Cubs
'75 IH 140 w/1000 loader
C-3 mower, FH Woods 42F, 22 sickle (2), 54A blade, L-54 blade, 194 plow, FH L-38 disk, FH LB disk, 144 cultivators, FH platform carrier
User avatar
Denny Clayton
10+ Years
10+ Years
 
Posts: 3694
Joined: Wed Feb 05, 2003 1:18 pm
Location: OH, Sidney
Zip Code: 45365
Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.
Circle of Safety Award
Circle of Safety: Y

Re: 1pt fash hitch 3pt conversion

Postby Boss Hog » Fri Mar 09, 2012 7:51 pm

Kirk-NJ wrote:I thought that the 2 pt hitch point was a differnet size than the smaller one used on a cub. Am I wrong on this?


The SC and 200 etc had the small points the larger tracters had the same size point as a cub, I also agree with Jim
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
User avatar
Boss Hog
Cub Pro
Cub Pro
 
Posts: 9828
Joined: Mon Oct 24, 2005 8:35 pm
Location: VA. Randolph
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety Award
Circle of Safety: Y

Next

Return to Farmall Cub

Who is online

Users browsing this forum: Baidu Spider [2.0], FCUBMAN, Rudi, ShineOn and 5 guests