Arm & a Leg (update) (All Finshed) Added Pics

Yep, that's yellar alright. Lookin' good. Your trailer almost looks like a twin to mine.

that is looking real good clint.

Clint,

How did you prep the surfaces and what kind of paint did you use? I'm getting ready to rebuild my engine and I was wondering how you cleaned yours.

it was first sand blasted then tore completly apart to get all of the sand out and repaired. then put back together, all but the small parts. I took a wire brush on a drill to any spots that had any dirt or surffest rust. For the oil spots i used paint thinner or starter fluid and a rag to clean off, then paint it. I used Case IH paint. Over all it cost less to use it. Thought it would cost more.
A gallon cost me $60 or $65.

nice job on the restro-rebuild, what size rear tires are those they looked wide to me...

I like the CaseIH paint a lot. I did find the yeller to be quite a bit more money than red or white when I recently bought paint. Must be something precious in the pigment??

nice job on the restro-rebuild, what size rear tires are those they looked wide to me...

rear tire size is 8.3

Hey Clint...Very NICE job so far Lookin' forward to seein' the finished product ...'Country'

Well It took a lot longer then i wanted it to but it is all done. It has been for a little bit now but i just now have had the time to get the pics and post them on here. sorry it took this long. some of you may have seen it in the fall at the Hog Waller or a pic of it there, But i did not wont to leave this post with no ending so Here it is. I had some good and some bad times on this one. Dont know if i will ever sandblast one again or not Lot Of Work but i think it was worth it in the end. I am happy with the out come and hope to do another one soon.

You do not have the required permissions to view the files attached to this post.

Looking Good Clint. Nice Job!

Looks good Clint. All those bits and pieces fitting together.

that came out really nice clint, nice job.

Looks real good Clint nice job

Looks great, Clint.

Very nice job Clint!

Makes me want to paint one of mine.