Thompson Seeder hinges

All non-Cub/Cadet/IH/Farmall/Case tractor and machinery discussions.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Thompson Seeder hinges

Postby TJG » Wed Apr 18, 2012 8:24 pm

I'm finishing my Thompson Seeder (previously posted) and I'm missing 2 of the male-side hinges. I don't expect anyone to have them laying around, but does someone have any close, or know of a source for this type of hinge? The male pin is 11/64 diameter x 5/8 long.

Also, there was one pin to fasten the "drive rope" in the hole. Again, anyone know of a source for such things?

Thanks,

Todd
Copy of IMG_2836.JPG
Copy of IMG_2836.JPG (76.8 KiB) Viewed 148 times

Copy of IMG_2837.JPG
Copy of IMG_2837.JPG (76.85 KiB) Viewed 148 times

Copy of IMG_2835.JPG
Copy of IMG_2835.JPG (50.36 KiB) Viewed 148 times

Copy of IMG_2839.JPG
Copy of IMG_2839.JPG (43.13 KiB) Viewed 148 times
TJG
5+ Years
5+ Years
 
Posts: 1221
Joined: Wed Jul 02, 2008 6:11 am
Location: MN, Mankato

Re: Thompson Seeder hinges

Postby Bob McCarty » Wed Apr 18, 2012 8:46 pm

If you can't find anything acceptable and have an art foundry (brass and bronze sculptures) nearby, they can easily make a pattern and cast them. I had that done on a Thomas grain drill that I restored. Cost was by the pound and reasonable in my mind.

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
Bob McCarty
Team Cub Mentor
Team Cub Mentor
 
Posts: 5636
Joined: Tue May 25, 2004 8:02 pm
Location: CO, Longmont
Zip Code: 80501
Circle of Safety Award
Circle of Safety: Y

Re: Thompson Seeder hinges

Postby jwl » Thu Apr 19, 2012 1:28 am

Thats a real nice restore of a lessor seen item.
jwl
Cub Star
Cub Star
 
Posts: 72
Joined: Sat Apr 24, 2010 11:24 pm
Zip Code: 52738


Return to Other Tractors and Machinery

Who is online

Users browsing this forum: No registered users and 4 guests